12 Second CC 5.3 hit the dyno today!
#1
TECH Apprentice
Thread Starter
12 Second CC 5.3 hit the dyno today!
Results: 515 hp and 487 lb-ft only pulling to 6k!
They started to fall off because we were running a lot of times back to back. The truck's stock 60k all terrains couldnt hook on the dyno at all. Wound up with 600 lb in the bed and double strapped with 25 psi in the tires to make the pulls we got.
They started to fall off because we were running a lot of times back to back. The truck's stock 60k all terrains couldnt hook on the dyno at all. Wound up with 600 lb in the bed and double strapped with 25 psi in the tires to make the pulls we got.
Last edited by vettelovralexand; 04-11-2015 at 08:48 PM.
#5
TECH Apprentice
Thread Starter
12.700@109.48 at IRP on 4/1.
Mods: Roush TVS1900 with 10% overdrive lower pulley, 219/234 BTR specd cam, PRC stage 1 LS6 heads w BTR platinum springs with Ti retainers, Kooks 1 7/8 headers with catless y pipe, factory NNBS flex fuel pump, and 6.2 flex fuel injectors. Tuned for 93 octane by Blackbear performance.
Mods: Roush TVS1900 with 10% overdrive lower pulley, 219/234 BTR specd cam, PRC stage 1 LS6 heads w BTR platinum springs with Ti retainers, Kooks 1 7/8 headers with catless y pipe, factory NNBS flex fuel pump, and 6.2 flex fuel injectors. Tuned for 93 octane by Blackbear performance.
Trending Topics
#8
TECH Apprentice
Thread Starter
By the look of the truck you wouldnt know that the truck had anything but corsa exhaust done, so just picture a white z71 crew cab with that and a 1 inch front level from bilstein 5100s and youve got the idea.
I have a video in my thread here: https://www.performancetrucks.net/forums/drag-racing-139/new-pb-2009-tvs1900-h-c-ccsb-12-second-crew-cab-536724/
I am still waiting on the dyno videos.
I have a video in my thread here: https://www.performancetrucks.net/forums/drag-racing-139/new-pb-2009-tvs1900-h-c-ccsb-12-second-crew-cab-536724/
I am still waiting on the dyno videos.
#9
TECH Apprentice
Thread Starter
Here is the video of the highest power run:
You can see by the graph in the video that it had already done 2 dyno burnouts and they had cranked the straps down to get a good pass in. It did a burnout again the next run before we added weight and dropped tire pressure, but it was already heat soaking. Enjoy!
You can see by the graph in the video that it had already done 2 dyno burnouts and they had cranked the straps down to get a good pass in. It did a burnout again the next run before we added weight and dropped tire pressure, but it was already heat soaking. Enjoy!
Last edited by vettelovralexand; 04-13-2015 at 12:32 PM.