Pitt 402 Launch pic 7 dyno
#31
Thread Starter
Joined: Sep 2007
Posts: 2,475
Likes: 12
From: Orange Park Fl
Well guys, fell short of my goal. The slicks apparently were too wide for a 10" rim and it was swerving all over the track. Thank goodness I brought my old ET radials..ran a best of 11.51 on the slicks, 3 runs total (2 runs aborted half way down the track). Changed out the tires and ran 11.3 @ 117 and then a 11.17 @ 118 mph. Will have vids tomorrow. My eight mile was 7.05, sixty foot was 1.57. Still can't let the TC flash, having to slowly press the gas. I'm still sittin on 2-3 tenths in first gear. What a fun day !!!
Pitt
Pitt
#33
Thread Starter
Joined: Sep 2007
Posts: 2,475
Likes: 12
From: Orange Park Fl
#35
Thread Starter
Joined: Sep 2007
Posts: 2,475
Likes: 12
From: Orange Park Fl
#36
Banned
iTrader: (4)
Joined: Oct 2003
Posts: 5,151
Likes: 1
From: From Houma La. Living n Ellisville Miss.
Well guys, fell short of my goal. The slicks apparently were too wide for a 10" rim and it was swerving all over the track. Thank goodness I brought my old ET radials..ran a best of 11.51 on the slicks, 3 runs total (2 runs aborted half way down the track). Changed out the tires and ran 11.3 @ 117 and then a 11.17 @ 118 mph. Will have vids tomorrow. My eight mile was 7.05, sixty foot was 1.57. Still can't let the TC flash, having to slowly press the gas. I'm still sittin on 2-3 tenths in first gear. What a fun day !!!
Pitt
Pitt
what air pressure were you running when it goes to swaying go up on air pressure it tightens up the side wall.
real nice times Pete is going to be happy 2 of his trucks are shining this weekend.
#38
Thread Starter
Joined: Sep 2007
Posts: 2,475
Likes: 12
From: Orange Park Fl
17 on the second
14 on the third....then changed tires and started to go !!
How did you do ???
Pitt
Thread
Thread Starter
Forum
Replies
Last Post
jtphelps289
GM Parts Classifieds
18
Sep 29, 2015 12:00 PM
jtphelps289
Miscellaneous Classifieds
0
Sep 1, 2015 09:11 PM
jtphelps289
Cars and Motorcycle Classifieds
0
Sep 1, 2015 08:58 PM




