dunno if most of you know.
2008 CCSB
6.2/60e milled heads (20 thousandths)
4:10s/tru-trac
Truckshop tune
228/236 112+2 cam *low lift*
PI3600/Billet 1-2 4th gear servos
UD crank pulley
Pacesetter LT/OR-y 3" exhaust
CAI
28" M&H DRs
full tank of gas no weight reduction


first pass out after an hour of driving
81* 106 IATs (dashhawk in the truck)

RT. .164
60' 1.742
330 5.210
1/8 8.139
MPH 83.35
1000 10.692
1/4 12.870
103.28

let it sit about 15 min
open exhast at the 2 bolt flange
spinning a little
80*
101 IAT

RT.439
60' 1.800
330 5.235
1/8 8.131
MPH 84.34
1000 10.657
1/4 12.809
MPH 104.46

let it sit another 20 min
open exhaust
spinning a little worse
79*
101 IAT

RT .266
60' 1.804
330 5.250
1/8 8.156
MPH 84.12
1000 10.688
1/4 12.845
MPH 104.24

last run of the night.
the truck spun just like before
79*
98* IAT

RT .473
60' 1.743
330 5.178
1/8 8.080
MPH 84.04
1000 10.614
1/4 12.773
MPH 104.09


the truck runs good for being used as a DD/family truck. all im going to do is put bigger injectors since its running out, and retune the transmission side of the tune when i put my built tranny in.

 

Nice times.
Check your PMs. I sent you one.

 

Good times cuz I hope I can run that good!

 

Talk about a sleeper! Can you hear that cam or does it sound fairly stock at idle?

 

12 second truck club! You're 2wd, right?

 

you can hear the cam. i put a 36" muffler to help with it. i ran open exhaust last night and it sounded sweet

 

good job niff! that things a beast!

 

thanks Lance! you need to help me with my nitrous set up jj man


yeah its a 2wd truck

 

Sweet and congrats! Whats you compression at now? Since you milled the heads

 

There is going to be some records broken this winter...i cant wait for cooler weather