Flaco's Lil Sis goes 175mph!
Jan 19, 2013 | 07:39 AM
#52
Just to expand on my thoughts a little...
1/8 mile stats show,
Your HP computed from your vehicle 5.946 ET is 920.89 rear wheel HP.
Your HP computed from your vehicle 124.7 MPH is 1,210.26 rear wheel HP.
Which is about in line for his 9.1 1/4 mile ET, but nothing even close to hp needed to run 175MPH... Would have to have picked up about 600 or MORE hp at half track to back door that 175MPH.
And with a Glide, with no OD and no lock up converter, depending on the gear the truck has, that motor would have been SCREAMING through the traps, and I don't know how much shut down that racks has, but it would have been WORK to stop that truck from 175 with no chute too.
I don't know, everything adds up on that slip, but the MPH... Just sayin...
Not trying to start anything.
1/8 mile stats show,
Your HP computed from your vehicle 5.946 ET is 920.89 rear wheel HP.
Your HP computed from your vehicle 124.7 MPH is 1,210.26 rear wheel HP.
Which is about in line for his 9.1 1/4 mile ET, but nothing even close to hp needed to run 175MPH... Would have to have picked up about 600 or MORE hp at half track to back door that 175MPH.
And with a Glide, with no OD and no lock up converter, depending on the gear the truck has, that motor would have been SCREAMING through the traps, and I don't know how much shut down that racks has, but it would have been WORK to stop that truck from 175 with no chute too.
I don't know, everything adds up on that slip, but the MPH... Just sayin...
Not trying to start anything. Last edited by Gadgetized; Jan 19, 2013 at 07:49 AM.
Jan 19, 2013 | 08:55 AM
#53
Thread Starter
13 Second Truck Club
iTrader: (1)
Joined: Feb 2008
Posts: 1,333
Likes: 8
From: Sublette, KS
Well the other thing is he said he left on 5psi and only got to a total of 18psi in first, on a glide geared tall enough to go 175+, how fast could it go in first? 115+? So almost all of the 1/8 was ran in first gear not nearly full power, then in second it got full power, PLUS he spun off the dig, so yeah 1/8 mile wont match his 1/4 mile...
Jan 19, 2013 | 09:06 AM
#55
Thread Starter
13 Second Truck Club
iTrader: (1)
Joined: Feb 2008
Posts: 1,333
Likes: 8
From: Sublette, KS
Here's another example, my truck...
My 1/8 mile don't match my 1/4 mile even close! According to the Wallace 1/8-1/4 calculator, I should have ran a 13.05@118.67 but I actually hit full boost in first and second.
My 1/8 mile don't match my 1/4 mile even close! According to the Wallace 1/8-1/4 calculator, I should have ran a 13.05@118.67 but I actually hit full boost in first and second.
Jan 19, 2013 | 10:33 AM
#57
Even if the 1/8 mile was at 18psi and the second 1/8 was at 25psi, that's a 6-700 hp gain from only 7psi of boost???
I agree, the truck is fast as hell, but I just have to think there was a timing glitch with that mph...
Jan 19, 2013 | 11:54 AM
#58
Jan 20, 2013 | 09:30 AM
#60
Thread Starter
13 Second Truck Club
iTrader: (1)
Joined: Feb 2008
Posts: 1,333
Likes: 8
From: Sublette, KS
I see what your saying and I agree with you on your pass, but his ET didn't pick up from 1/8 to 1/4 like yours did. How do you go 600-700 hp faster (mph) in the second half but not go quicker (et)???
Even if the 1/8 mile was at 18psi and the second 1/8 was at 25psi, that's a 6-700 hp gain from only 7psi of boost???
I agree, the truck is fast as hell, but I just have to think there was a timing glitch with that mph...
Even if the 1/8 mile was at 18psi and the second 1/8 was at 25psi, that's a 6-700 hp gain from only 7psi of boost???
I agree, the truck is fast as hell, but I just have to think there was a timing glitch with that mph...
