Drag Racing Fastest Truck List inside, sortable for any make/model/engine listed.
TIME SLIP DATABASE

clip from a few months ago

Thread Tools
 
Search this Thread
 
Old Aug 20, 2008 | 01:52 PM
  #1  
outlawz2004's Avatar
Thread Starter
TECH Addict
iTrader: (18)
 
Joined: Sep 2007
Posts: 2,633
Likes: 2
Default clip from a few months ago

Went 15.1 at 90mph. I think I could have dipped into the 14s with weight reduction. 04 silverado ecsb with 4.8L, Wheatley dual tune 89/93, Lt's and offroad y pipe, slp loudmouth exhaust, K&N intake, 3.42s with open diff. This was with 20s on the front and 16s on the back. Full street weight with tailgate, stereo system with subwoofers, etc.
Reply
Old Aug 20, 2008 | 02:26 PM
  #2  
vff_jeff's Avatar
On The Tree
iTrader: (9)
 
Joined: Feb 2008
Posts: 181
Likes: 0
From: Liberty Hill, TX
Default

Back when My truck had the same mods it went 16.0 @ 87mph without headers, and 15.7 @88 mph with. What was your 60ft? You sure you dont have a g80? Hell My truck with the same mods and a 75 shot went 15.3 @ 93mph. My 60ft was about 2.4-2.55. Thats very good for an open diff 3.42's tune intake and exhaust. Or were you doing 4wd starts?
Reply
Old Aug 20, 2008 | 03:43 PM
  #3  
chevrolet all the way's Avatar
TECH Addict
iTrader: (24)
 
Joined: Jun 2008
Posts: 2,615
Likes: 0
From: trussville alabama
Default

i have that minus lts plus e fans in a rcsb and im runnin 15.5! wtf!
well then again i did have 20s out back and from what vff jeff said about headers i should be right with you. and i got a problem w/ my lifters so i should be about there

Last edited by chevrolet all the way; Aug 20, 2008 at 03:52 PM. Reason: nevermind
Reply
Old Aug 20, 2008 | 04:04 PM
  #4  
outlawz2004's Avatar
Thread Starter
TECH Addict
iTrader: (18)
 
Joined: Sep 2007
Posts: 2,633
Likes: 2
Default

Open diff 3.42s, I can assure you. This truck has always run strong, even from the factory. I used to outrun alot of 5.3s stock or with just intake, exhaust and programmer.My 60ft was 2.??, dont remember. I will have to get out a time slip. It is slow off the line, but gets going good from there. I am planning on taking out/off alot of things next time I go to the track, it should run at least a 14.8 I figure. I have efans but never put them on. Oh, and this is a two wheel drive truck.
Reply
Old Aug 20, 2008 | 05:45 PM
  #5  
outlawz2004's Avatar
Thread Starter
TECH Addict
iTrader: (18)
 
Joined: Sep 2007
Posts: 2,633
Likes: 2
Default

60fts are 2.37
Reply
Old Aug 21, 2008 | 12:53 PM
  #6  
chevrolet all the way's Avatar
TECH Addict
iTrader: (24)
 
Joined: Jun 2008
Posts: 2,615
Likes: 0
From: trussville alabama
Default

mine is 2.40 but i spin off the line like a mother
Reply
Old Aug 21, 2008 | 01:00 PM
  #7  
outlawz2004's Avatar
Thread Starter
TECH Addict
iTrader: (18)
 
Joined: Sep 2007
Posts: 2,633
Likes: 2
Default

With the kumho tires, I spun bad. With the sumitomo htrzs running low pressure, I spin just a little.
Reply
Old Aug 21, 2008 | 02:05 PM
  #8  
chevrolet all the way's Avatar
TECH Addict
iTrader: (24)
 
Joined: Jun 2008
Posts: 2,615
Likes: 0
From: trussville alabama
Default

im lookin at truetrac n 3.90s to fix that but i think im just gonna add 2 wheel spin lol
Reply
Old Aug 21, 2008 | 02:51 PM
  #9  
outlawz2004's Avatar
Thread Starter
TECH Addict
iTrader: (18)
 
Joined: Sep 2007
Posts: 2,633
Likes: 2
Default

I hear ya. I want to put in some 4.10s and a lsd, that should help alot.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SloSVO
GM Drivetrain & Suspension
9
Nov 22, 2020 07:34 PM
echoman
Southern
6
Jan 21, 2016 09:42 PM
Chevy305
GMT 900 Trucks General Discussion
5
Sep 28, 2015 09:21 PM
dantheman1540
FUEL SYSTEMS
8
Sep 15, 2015 08:28 PM
SWINGRRRR
GMT 800 & Older GM General Discussion
5
Sep 3, 2015 07:49 PM




All times are GMT -5. The time now is 03:18 AM.