PerformanceTrucks.net Forums
0 2017/02/15 07:19:56
0 2017/02/15 07:20:03
0 2017/02/15 07:20:13
My second version of the 5" intake
My second version of the 5" intake
0 2017/04/09 12:13:51
Second version of the 3" charge pipe with Tial 50mm and IAT bung.
Second version of the 3" charge pipe with Tial 50mm and IAT bung.
0 2017/04/09 12:13:58
0 2017/04/09 12:14:08
Had some couplers made with my Purpose Built logo
Had some couplers made with my Purpose Built logo
0 2017/04/09 12:14:20
I got way too excited about these stickers lol awesome quality.
I got way too excited about these stickers lol awesome quality.
0 2017/04/09 12:14:26
Tanked and blasted some parts
Tanked and blasted some parts
0 2017/05/13 08:24:06
Deburred and smoothed out with 3M unitized fine wheels.
Deburred and smoothed out with 3M unitized fine wheels.
0 2017/05/13 08:24:37
0 2017/05/13 08:25:30
New pick up tube, o-ring and 2 bolt girdle.
New pick up tube, o-ring and 2 bolt girdle.
0 2017/05/13 08:26:36
0 2017/05/13 08:27:58
0 2017/05/13 08:28:53
0 2017/05/13 08:30:06
Had to set the heads and intake on the block to see how it's going to come out. I'm happy with it so far.
Had to set the heads and intake on the block to see how it's going to come out. I'm happy with it so far.
0 2017/05/20 15:08:57
0 2017/06/13 09:35:17
0 2017/06/13 09:35:48
0 2017/06/13 09:37:32
0 2017/06/13 09:45:02
0 2017/06/25 07:59:25
0 2017/06/25 08:12:39
0 2017/06/25 08:12:40
0 2017/06/25 08:12:41
0 2017/06/25 08:12:41
I don't know Summit isn't losing money on shipments with this huge box and little fitting plug.
I don't know Summit isn't losing money on shipments with this huge box and little fitting plug.
0 2017/06/25 08:24:36
Little details, re-sprayed the engine bay gloss black, cleaned plastic covers and installed a new washer fluid resi.
Little details, re-sprayed the engine bay gloss black, cleaned plastic covers and installed a new washer fluid resi.
0 2017/06/25 08:24:47
ICT billet alternator and power steering brackets also go painted. P/N 551520-3
ICT billet alternator and power steering brackets also go painted. P/N 551520-3
0 2017/06/25 08:24:51
Found an 04 2wd 4l80 in the junkyard. Trans, linkage, sensors, dip stick and cross member for $230. I need to source a 4wd output shaft and tail housing.
Found an 04 2wd 4l80 in the junkyard. Trans, linkage, sensors, dip stick and cross member for $230. I need to source a 4wd output shaft and tail housing.
0 2017/06/25 08:24:59
Little degreaser and wire brush. It's going to get a rebuild with a few upgrades, red disks, sprag, and maybe some shaft up grades but haven't decided how in-depth to go on it yet.
Little degreaser and wire brush. It's going to get a rebuild with a few upgrades, red disks, sprag, and maybe some shaft up grades but haven't decided how in-depth to go on it yet.
0 2017/06/25 08:25:00
Change of plans for valve covers. The Snipers are nice and fairly cheap, FYI they do not have vent tubes. I'll be evacuating crank case from the valley cover.
Change of plans for valve covers. The Snipers are nice and fairly cheap, FYI they do not have vent tubes. I'll be evacuating crank case from the valley cover.
0 2017/06/25 08:25:02
Boltdepot.com has great prices on hardware. Stainless allen head bolts are soo much cheaper than fancy ARP dress ups.
Boltdepot.com has great prices on hardware. Stainless allen head bolts are soo much cheaper than fancy ARP dress ups.
0 2017/06/25 08:25:10
Pull the front and rear drive shafts, 65e and np149 t-case. Need to shorten the rear shaft and extend the front shaft or just replace it with a 2500 hd front shaft. The T-case is going to be separated, inspected, soft parts replaced and input shaft sent out to get machined to accept the 80e output shaft.
Pull the front and rear drive shafts, 65e and np149 t-case. Need to shorten the rear shaft and extend the front shaft or just replace it with a 2500 hd front shaft. The T-case is going to be separated, inspected, soft parts replaced and input shaft sent out to get machined to accept the 80e output shaft.
0 2017/06/25 08:25:14
Old LQ9 out. Saving for another project down the road.
Old LQ9 out. Saving for another project down the road.
0 2017/06/25 08:25:16
0 2017/06/29 15:25:01
0 2017/06/29 15:25:03
0 2017/06/29 15:25:05
How are you all deleting the connectors in the harness that you don't use? Cut the connector off and cover each wire? Also with HP tuners, are you able to disable them so there is no power going to them? I'm removing knock, purge solenoid, coolant level and the not in-use one in the passenger side fire wall. I don't have HP tuners yet. Thanks in advance.
How are you all deleting the connectors in the harness that you don't use? Cut the connector off and cover each wire? Also with HP tuners, are you able to disable them so there is no power going to them? I'm removing knock, purge solenoid, coolant level and the not in-use one in the passenger side fire wall. I don't have HP tuners yet. Thanks in advance.
0 2017/07/15 14:51:33
0 2017/07/22 21:26:56
5" intake
5" intake
0 2017/07/22 21:27:00