new Rifle
#51
The bushnell banner 4-12 on my AR has held up good. Even slung it hard as i could and it landed on the side of a bank. Checked zero and it was only off by 2" at 100yds.
If you want a tough scope and don't need in the 3Xx magnification I'd go with this one
Millett 6-25X56 LRS-1 Scope (BK81007) - .1 Mil Click Illuminated Long Range Riflescope
That is probably what's going on my 17hmr
Millett 6-25X56 LRS-1 Scope (BK81007) - .1 Mil Click Illuminated Long Range Riflescope
That is probably what's going on my 17hmr
I got one on my 300wm. TPS rings were expensive.
#54
I dont have a clue. It was cheap enough so i got it.
The bushnell banner 4-12 on my AR has held up good. Even slung it hard as i could and it landed on the side of a bank. Checked zero and it was only off by 2" at 100yds.
One word comes to mind. Heavy.
I got one on my 300wm. TPS rings were expensive.

The bushnell banner 4-12 on my AR has held up good. Even slung it hard as i could and it landed on the side of a bank. Checked zero and it was only off by 2" at 100yds.
One word comes to mind. Heavy.
I got one on my 300wm. TPS rings were expensive.

I plan to set the trigger right at the line to keep it light as possible, but safe at the same time.
#56
Bought a Lee Pro 1000 to reload 9mm and built a bench for reloading. My press should be here on Saterday. Here is my reloading station.


Got the Rifle Basix trigger installed and set at about 2#.
and a shot out at the range


Got the Rifle Basix trigger installed and set at about 2#.
and a shot out at the range
#60
Has anyone tried a Accushot Scoop? I saw one at the gun store the other day. It was a 8-32x56, has illuminated red/green mildot reticle. side parallax. Looked very clear in the store.





