Tune HELP!! HP Tuners
#1
Registered User
Thread Starter
Join Date: May 2010
Location: Lafayette, La
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Tune HELP!! HP Tuners
I am trying to add some timing(not too much 2-5*) in the "alcohol correction pe/cot" table, for when i run E85..
what i am trying to do is bring the alcohol correction table ONLY when i have e-85 in the tank..or when i am commanding a stoich near that of e-85
My question is under the gas and alcohol spark tables there is a table that's called "multi vs composition" (screen shot attached) I am aware of what interpolation means.. but what do the values represent?? is it injector duty cycle? and what do the values adjust? Anyone know this?? Or am i in the wrong ball park?
THE MAIN Question.... What tables in the logic command the VCM to use these (gas/alcohol spark correction)tables OTHER than if it is in PE?
The forum is not letting me attach the screen shot....
what i am trying to do is bring the alcohol correction table ONLY when i have e-85 in the tank..or when i am commanding a stoich near that of e-85
My question is under the gas and alcohol spark tables there is a table that's called "multi vs composition" (screen shot attached) I am aware of what interpolation means.. but what do the values represent?? is it injector duty cycle? and what do the values adjust? Anyone know this?? Or am i in the wrong ball park?
THE MAIN Question.... What tables in the logic command the VCM to use these (gas/alcohol spark correction)tables OTHER than if it is in PE?
The forum is not letting me attach the screen shot....
Thread
Thread Starter
Forum
Replies
Last Post
LCHEE
GM Drivetrain & Suspension
10
10-24-2020 04:10 PM
mr03silverado
GMT 800 & Older GM General Discussion
4
06-26-2016 06:05 AM