Notices
Tuning, Diagnostics, Electronics, and Wiring HP Tuners | EFILive | Hand Held Programmers | Stand Alone PCM's | Electronics | Wiring Diagrams

Possible electrical problem?

Thread Tools
 
Search this Thread
 
Old 06-19-2012, 08:19 PM
  #1  
Slowest turbo build ever!
Thread Starter
iTrader: (2)
 
black00chev's Avatar
 
Join Date: Dec 2009
Location: Warrenton, VA
Posts: 2,905
Received 1 Like on 1 Post
Default Possible electrical problem?

So I went out for a little cruise after work today, was out for maybe 45min or so. On the way home I noticed, just before I turned onto my road, that the security and battery light flashed for just a second. This was just 5min after giving the truck a good 0-80ish romp after some kid cut me off and kept looking back at me .


Any idea what could be causing this? Ive noticed this happen maybe a time or two before. And also a couple times before the security light will randomly start flashing until I turn the truck off.



HELP!
Old 06-20-2012, 03:20 PM
  #2  
Slowest turbo build ever!
Thread Starter
iTrader: (2)
 
black00chev's Avatar
 
Join Date: Dec 2009
Location: Warrenton, VA
Posts: 2,905
Received 1 Like on 1 Post
Default



Hump day bump!
Old 06-21-2012, 08:26 PM
  #3  
Slowest turbo build ever!
Thread Starter
iTrader: (2)
 
black00chev's Avatar
 
Join Date: Dec 2009
Location: Warrenton, VA
Posts: 2,905
Received 1 Like on 1 Post
Default

Old 06-24-2012, 03:13 PM
  #4  
Slowest turbo build ever!
Thread Starter
iTrader: (2)
 
black00chev's Avatar
 
Join Date: Dec 2009
Location: Warrenton, VA
Posts: 2,905
Received 1 Like on 1 Post
Default

If anyone has any idea that would be great!


It did this to me again yesterday just cruising over to my buddies house about 5min into the drive. This time JUST the battery light came on then off for less then a second.
Old 06-24-2012, 03:30 PM
  #5  
TECH Fanatic
iTrader: (2)
 
cammed00's Avatar
 
Join Date: Feb 2012
Location: Ft.Worth
Posts: 1,157
Likes: 0
Received 1 Like on 1 Post
Default

Sometimes my gauges go alittle weird and the low fuel light,security light and battery light will come on for a second then go back off along with the gas gauge going all the way to E then back to normal. I have yet to figure it out but thinking it's a ground issue somewhere. Hope someone else chimes in to help you out man.
Old 06-24-2012, 08:00 PM
  #6  
Custm2500's Rude Friend
iTrader: (17)
 
1FastBrick's Avatar
 
Join Date: Apr 2007
Location: JunkYard
Posts: 14,326
Received 761 Likes on 630 Posts
Default

How old is the Battery???
Old 06-24-2012, 09:49 PM
  #7  
Slowest turbo build ever!
Thread Starter
iTrader: (2)
 
black00chev's Avatar
 
Join Date: Dec 2009
Location: Warrenton, VA
Posts: 2,905
Received 1 Like on 1 Post
Default

Originally Posted by 1FastBrick
How old is the Battery???
Was happening on old battery, that one died. Put new ACDelco battery in and has happened twice with the new battery. Terminals were nice and snug when it was put in, but Ill check them again tomorrow when I get home from work.

I used my aeroforce gauges to check DTCs but nothing was stored. However, previously when the security light came and stayed on. It had some universal code for lost communication or something like that, but I dont remember the exact fault.
Old 06-24-2012, 09:51 PM
  #8  
TECH Fanatic
 
Suburbazine's Avatar
 
Join Date: Feb 2009
Location: Baton Rouge, LA
Posts: 1,635
Likes: 0
Received 1 Like on 1 Post
Default

Your alternator is probably crapping out at high RPM or heat buildup. Use a digital multimeter to read out voltage while running. If it's less than 13v, you have a problem.
Old 06-24-2012, 10:30 PM
  #9  
Slowest turbo build ever!
Thread Starter
iTrader: (2)
 
black00chev's Avatar
 
Join Date: Dec 2009
Location: Warrenton, VA
Posts: 2,905
Received 1 Like on 1 Post
Default

It shouldnt be... I put a new 130amp unit on with my efans as of late January. Volt meter in the dash never shows below 14 from what I can tell. But I can moniter that better with my Aeroforce gauges.

And this was happening before either of those mods were done as well.
Old 06-25-2012, 01:37 AM
  #10  
Custm2500's Rude Friend
iTrader: (17)
 
1FastBrick's Avatar
 
Join Date: Apr 2007
Location: JunkYard
Posts: 14,326
Received 761 Likes on 630 Posts
Default

Could be wiring related. That loss of communication could be telling you something.

It could be several things. The battery and alternator are usually the common faults. It is less likey since you replaced those. It could be the electrical portion of the ignition switch, possibly a bad ground, a loose wire, even a bad module.

You will need to monitor the voltage as mentioned. And if you get a code it could be helpful.


Quick Reply: Possible electrical problem?



All times are GMT -5. The time now is 05:06 PM.