No Convertor Lock-up

Reply Subscribe

Thread Tools

Search this Thread

Nov 30, 2012 | 07:50 PM

#11

1FastBrick

Custm2500's Rude Friend

iTrader: (17)

Joined: Apr 2007

Posts: 14,580

Likes: 891

From: JunkYard

Quote:

Originally Posted by TexasGMC08

It was a plug problem.. rpm's all over th place no power..I took the E3's out and put in the NGK's! running fine now light went away... art for my TCC valve will be in today!!

E3's have caused problems in several vehicles. Now that you have changed the plugs and the lights are off, drive it around and see if the light comes back on. Also see if the TCC locks up properly now.

This was most likely your whole problem.

Misfires will cause the TCC not to lock up as mentioned before.

Dec 1, 2012 | 08:37 PM

#12

TexasGMC08

Thread Starter

On The Tree

Joined: Oct 2012

Posts: 174

Likes: 0

From: Fort Worth, Texas Area

Update

:b ang:

.... Ok changed the TCC valve, spark plugs, test the wires, test the coils, and still have the cut out mis... but it comes and goes!!! when it warms up its hard to start.... If TSP does and change on the "misfire counters" how do i up load the new tune file into my PCM?? I dont have the HP tuner eqiupment to do the upload....