Installing the 2bar MAP Sensor tonight..... advice?

Reply Subscribe

Thread Tools

Search this Thread

Jun 10, 2007 | 09:32 AM

#11

03sierraslt

Admin

iTrader: (22)

Joined: Jul 2004

Posts: 19,007

Likes: 221

From: Western PA

Quote:

Originally Posted by Wilde Racing

I don't know about efi live, but HPtuners has a bias (Map vs. IAT), changing the bias to 1.0 helps a ton IMO.

You are refering to the ECT IAT bias right, if so then yes I set mine to 1.0 across the board. Then you have to add in a bunch to you VE table.

Jun 10, 2007 | 09:49 AM

#12

Wilde Racing

How do I change this text

iTrader: (26)

Joined: Jan 2005

Posts: 7,294

Likes: 2

From: Behind the TIG welder

Quote:

Originally Posted by 03sierraslt

You are refering to the ECT IAT bias right, if so then yes I set mine to 1.0 across the board. Then you have to add in a bunch to you VE table.

Yep thats it, It made my day-to-day tunning much easier

Jun 10, 2007 | 10:19 AM

#13

03sierraslt

Admin

iTrader: (22)

Joined: Jul 2004

Posts: 19,007

Likes: 221

From: Western PA

Same hear, prior to doing so I would go rich on cold mornings and lean in the hot afternoon. Now all is good. I was going to suggest this but i dont know how EFI live is setup.

Jun 10, 2007 | 11:03 AM

#14

Holty

Notorious BIG

iTrader: (6)

Joined: Aug 2005

Posts: 1,744

Likes: 0

From: Pittsburgh, PA

Quote:

Originally Posted by 03sierraslt

Same hear, prior to doing so I would go rich on cold mornings and lean in the hot afternoon. Now all is good. I was going to suggest this but i dont know how EFI live is setup.

I had the same problem except mine was already set to 1 acrossed the board. I had to sway my bias towards ECT to get better consistancy.

Last edited by Holty; Jun 10, 2007 at 08:08 PM.