help is needed. cooling fan issue.

Reply Subscribe

Thread Tools

Search this Thread

Nov 13, 2014 | 11:03 PM

#11

WS64Mula

Thread Starter

On The Tree

iTrader: (1)

Joined: Apr 2008

Posts: 162

Likes: 8

Nelson performance..... Sent a PM

Nov 14, 2014 | 12:55 PM

#12

WS64Mula

Thread Starter

On The Tree

iTrader: (1)

Joined: Apr 2008

Posts: 162

Likes: 8

Found the problem. One of the wires pulled out of the pigtails. Had enough to part of the system, but not enough for the other half. Pia!

Nov 17, 2014 | 11:55 AM

#13

Nelson Performance

FormerVendor

Joined: Jan 2013

Posts: 65

Likes: 1

Well that sux, Just told the harness guy to give each harness a more thorough pull test on each wire. Glad you found it.

Feb 3, 2018 | 10:30 AM

#14

Reckless

Still moddin'

iTrader: (7)

Joined: Nov 2001

Posts: 9,916

Likes: 28

From: Vengeance Racing

Dug this one back up. I have F-Body fans and I am using the Nelson harness. Both low speed fans operate when the engine is running, and then the high speed engages with the A/C clutch wire. Is there a way to make the fans come on with temperature from the ECU as programmed? The harness I have just has the single wire to the PCM.