getting a dtc with new setup

Reply Subscribe

Thread Tools

Search this Thread

Sep 4, 2009 | 07:46 PM

VHslow

Thread Starter

Teching In

Joined: Aug 2009

Posts: 7

Likes: 0

getting a dtc with new setup

I just put a TBSS intake and TB with a X-link on my 6.0 and every time I give it full throttle it goes into reduced engine power and shows code
P2101. Is tunning required for this swap? anyone have any ideas?

Sep 4, 2009 | 07:49 PM

dlt76028

12 Second Truck Club

iTrader: (13)

Joined: Sep 2007

Posts: 5,883

Likes: 2

From: Crowley, TX

I think it has to do with the TB. Which one did you use?

Sep 4, 2009 | 07:57 PM

VHslow

Thread Starter

Teching In

Joined: Aug 2009

Posts: 7

Likes: 0

The TBSS 90mm

Sep 4, 2009 | 08:21 PM

dlt76028

12 Second Truck Club

iTrader: (13)

Joined: Sep 2007

Posts: 5,883

Likes: 2

From: Crowley, TX

hopefully someone else will come in and tell you exactly. It seems like it has to do with using a car TB over the truck.

Sep 4, 2009 | 09:17 PM

krambo

TECH Fanatic

iTrader: (4)

Joined: Jul 2005

Posts: 1,609

Likes: 2

From: Bangor, PA

Did you happen to cut the two looped pink wires on the X-link (provided it is version II). If so, they should be connected for use with the TBSS type TB.

Sep 4, 2009 | 10:40 PM

VHslow

Thread Starter

Teching In

Joined: Aug 2009

Posts: 7

Likes: 0

It is the version II, and the pink wires are untouched still in a loop.

Dec 13, 2009 | 04:43 PM

VHslow

Thread Starter

Teching In

Joined: Aug 2009

Posts: 7

Likes: 0

I'm still having the same issues with this P2101 code, Is the problem in the tune? or do I have a bad TB and or X link?

getting a dtc with new setup

getting a dtc with new setup

Trending Topics