Gauge cluster wiring schematic???
btw those are for my 06 crew cab
Oct 31, 2011 | 06:57 PM
#3
WOW! That's probably really great info for someone who knows how to read those things lol. I'm just looking for what each wire does...Mainly looking for:
bright lite indicator
turn signals (left and right)
speedometer
service engine light
bright lite indicator
turn signals (left and right)
speedometer
service engine light
Oct 31, 2011 | 08:04 PM
#5
Joined: Oct 2004
Posts: 4,985
Likes: 54
From: somewhere in TX
High beam indicator, and fuel level signal come off of the serial data bus. These are not hard wired functions.
VSS dk gn/wht term A4 at IPC
MIL bn/wht
VSS dk gn/wht term A4 at IPC
MIL bn/wht
Last edited by 01WS6/tamu; Oct 31, 2011 at 08:10 PM.
Trending Topics
Oct 31, 2011 | 08:25 PM
#8
Perhaps? I'm not real good with my wording. You all should just know what I mean lol
I would like to know what wires do what on the plug that plugs into the back of of the cluster
I would like to know what wires do what on the plug that plugs into the back of of the cluster
Oct 31, 2011 | 08:28 PM
#9
Joined: Oct 2004
Posts: 4,985
Likes: 54
From: somewhere in TX
The fuel level signal is processed by the pcm it sends 5 volts to the sender and gets a level reading in return. This is information is processed by the pcm then sent to the instrument cluster via serial data over the data bus there is not a hard wired fuel gauge input. What kind of vehicle is this in are you converting something or is it all in a stock application.
Oct 31, 2011 | 08:31 PM
#10
It's on my truck. 2007 classic chevy silverado. Installing aftermarket fuel level gauge.
How bout this? Couldn't I get the signal from the wire directly off wiring on the tank?
How bout this? Couldn't I get the signal from the wire directly off wiring on the tank?
