Tuning, Diagnostics, Electronics, and Wiring HP Tuners | EFILive | Hand Held Programmers | Stand Alone PCM's | Electronics | Wiring Diagrams

Full throttle, going no where

Thread Tools
 
Search this Thread
 
Old Nov 6, 2011 | 04:03 PM
  #1  
OH4CHEV's Avatar
Thread Starter
Teching In
 
Joined: Jul 2010
Posts: 28
Likes: 0
From: HOUSTON
Default Full throttle, going no where

2004 5.3 full throttle and the truck will not go anywhere.

any ideas? code is p0300. thanks. log attached.
Attached Files
File Type: hpl
BAD.hpl (65.7 KB, 71 views)
Reply
Old Nov 6, 2011 | 06:00 PM
  #2  
Wilde Racing's Avatar
How do I change this text
iTrader: (26)
 
Joined: Jan 2005
Posts: 7,294
Likes: 2
From: Behind the TIG welder
Default

You got a few issues. looks like you have a exhaust leak, injector or a lazy 02 due to the uneven LTFT at WOT. You may need to log fuel pressure as well. you really need to get that fixed.
Reply
Old Nov 6, 2011 | 08:05 PM
  #3  
OH4CHEV's Avatar
Thread Starter
Teching In
 
Joined: Jul 2010
Posts: 28
Likes: 0
From: HOUSTON
Default

fuel pressure is 57 under full throttle, no exhaust leaks anywhere. has to be catalytic converter.

I gave up. dont have time to mess with it. its either going to be a plugged cat or both, or bad injector(s). Going to a shop tomorrow. It sounds real muffled out of the pipe and sounds like a slight miss. I will post back once I figure it out. It got progressively worst since last week and now when you punch it from about any speed it just bogs and gains about 1 mph per 2 seconds- could easily ride a bike faster. I have never seen anything this bad, so if someone else wants to chime in confirming my thoughts on the cats being plugged.
Reply
Old Nov 6, 2011 | 09:08 PM
  #4  
Wilde Racing's Avatar
How do I change this text
iTrader: (26)
 
Joined: Jan 2005
Posts: 7,294
Likes: 2
From: Behind the TIG welder
Default

Do you own a IR heat gun?
Reply
Old Nov 6, 2011 | 09:16 PM
  #5  
OH4CHEV's Avatar
Thread Starter
Teching In
 
Joined: Jul 2010
Posts: 28
Likes: 0
From: HOUSTON
Default

NO, I will get one if the guy at the shop cant figure it out.
Reply
Old Nov 6, 2011 | 09:18 PM
  #6  
Wilde Racing's Avatar
How do I change this text
iTrader: (26)
 
Joined: Jan 2005
Posts: 7,294
Likes: 2
From: Behind the TIG welder
Default

you can check your cats before you take it to a shop. save some money.
Reply
Old Nov 10, 2011 | 09:20 PM
  #7  
OH4CHEV's Avatar
Thread Starter
Teching In
 
Joined: Jul 2010
Posts: 28
Likes: 0
From: HOUSTON
Default Catalytic converter, bank one

Catalytic converter, bank one
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GMCtrk
Drag Racing
38
Jan 27, 2016 06:47 PM
99bluefirebird
GM Parts Classifieds
4
Sep 17, 2015 08:05 PM
bisqikss
GM Engine & Exhaust Performance
15
Sep 8, 2015 03:35 AM
Stainless Works
GM Engine & Exhaust Performance
0
Sep 3, 2015 08:31 AM
Alvin@PCMofNC
Sponsor's Announcements, Sales, and Specials
0
Sep 3, 2015 06:38 AM




All times are GMT -5. The time now is 08:29 PM.