ok i have been battling a 4.8 cam/turbo to 6.0 cam/turbo swap with little annoying issues i just figured out my oil pressure issue after taking off 2 oil pumps and replacing the pickup tube anyway now i fired up the truck which is still setup on the 4.8 tune i havent driven it or anything just let it idle so the oil could flow and coat the internals and charge the battery a little bit motor sounds good no weird ticks or noises after i let it idle for a bit i turned the engine off and let it sit checked the oil and i was over like 2 qts which i did purposely when i was trying to figure the oil pressure thing well when i went to let some of oil out it was watery stuck my finger in it to smell the oil and i can smell fuel so question is now what could be wrong or could it just be that the tune is completely flooding the cylinders

 

Sounds like it is just rich. Are your plugs black? If so, it more than likely needs to be leaned out.