WTT: Built 98" Z28 for Built 99+ RCSB
Apr 26, 2009 | 09:00 PM
#1
WTT: Built 98" Z28 for Built 99+ RCSB
Considering going with another RCSB truck to play with and seeing if anybody is interested in trading for a 5.3 or 6.0 truck. The car is in good shape and built very well, ran 11.80s @ 119-120mph with a soft launch, theres a good bit more left in it. The hood, left front fender, ss-spoiler and rear quater are flat black. The hood is becuase it has not been painted, the left front fender has a hairline crack in it so i replaced it, ss spoiler is flat black becuase hasnt been painted yet, and the left rear quarter had a dent that I fixed. You could just paint these items, but im very **** and I had and have(if trade doesnt go trough) to paint the entire car. Only other prob is the dash pad is cracked which is a very common problem in the f-bodys.
1998 Camaro Z28 - 87K Miles
LS1/T56
Leather power seats, power mirrors, power windows/locks
Engine:
-TSP 231/234 .644/.598 112lsa camshaft
-PRC Dual Valve Springs
-TSP 7.4" Hardened Pushrods
-SLP Underive Pulley
-MTI Clear lid
-LS6 Intake
-Pacesetter Longtube headers with off road y-pipe with bullet dumped, or magnaflow catback also goes with it
-Racetronix Fuelpump
-MSD wires
-K&N Filter
-NOS Dry 100 Shot - Ive never sprayed it though
Transmission
6-speed
-02 T56 6-Speed out of a 02 SS
-LS7 Clutch/Flywheel/Hydrualics with only 900 miles on them
Drivetrain:
-Moser 12 Bolt w/ 33 spline axles, Eaton HD posi, 4.10 gears, and TA cover
-Denny's Nitrous ready steel driveshaft
Suspension:
-BMR subframe connectors
-BMR strut tower brace
-BMR Adj. torque arm
-Spohn Adj. lower control arms with relocation brackets
Wheels/Tires/Exterior
-15x3.5 Summit Stars with Tires
-15x8 Summit Stars with 28" MT Drag Radials -street legal
-VFN Sunoco Cowl Hood
-SS Spoiler
THE CAR IS NOW PRIMED/SEALED FLAT WHITE
[/QUOTE]
1998 Camaro Z28 - 87K Miles
LS1/T56
Leather power seats, power mirrors, power windows/locks
Engine:
-TSP 231/234 .644/.598 112lsa camshaft
-PRC Dual Valve Springs
-TSP 7.4" Hardened Pushrods
-SLP Underive Pulley
-MTI Clear lid
-LS6 Intake
-Pacesetter Longtube headers with off road y-pipe with bullet dumped, or magnaflow catback also goes with it
-Racetronix Fuelpump
-MSD wires
-K&N Filter
-NOS Dry 100 Shot - Ive never sprayed it though
Transmission
6-speed
-02 T56 6-Speed out of a 02 SS
-LS7 Clutch/Flywheel/Hydrualics with only 900 miles on them
Drivetrain:
-Moser 12 Bolt w/ 33 spline axles, Eaton HD posi, 4.10 gears, and TA cover
-Denny's Nitrous ready steel driveshaft
Suspension:
-BMR subframe connectors
-BMR strut tower brace
-BMR Adj. torque arm
-Spohn Adj. lower control arms with relocation brackets
Wheels/Tires/Exterior
-15x3.5 Summit Stars with Tires
-15x8 Summit Stars with 28" MT Drag Radials -street legal
-VFN Sunoco Cowl Hood
-SS Spoiler
THE CAR IS NOW PRIMED/SEALED FLAT WHITE
[/QUOTE]
Last edited by Ross @ EDO; Sep 9, 2009 at 08:57 PM.
Apr 27, 2009 | 06:00 AM
#3
