454SS for sale
#1
Thread Starter
TECH Junkie
iTrader: (46)
Joined: Jul 2007
Posts: 3,106
Likes: 2
From: Providence Village, TX
truck is gone
i have decided to sell my 454SS and invest my money elsewhere. it is a 1990 model with 80K miles. the motor has been bored .030, has a small cam (not sure of the specs, it was in there when i bought it), edelbrock intake, full MSD ignition, Harland Sharp roller rockers, Thorley tri-y headers, with a flowmaster 40 series muffler and cut-outs. it has a 2/4 drop, welded in roll pan, smoothie front bumper, spray in bed liner and molding removed. the interior has a B&M mega shifter and aftermarket stereo but is stock other than that. it needs a headliner (or at least needs it reglued) and the passenger side door needs some body work or new skin (has some bondo in it that was revealed when taking off the molding and a couple of dents that could probably be pulled out with the right tools) and the front bumper is still in primer and needs to be painted. i may have the headliner and door fixed before i sell it but im not going to guarantee it. as far as i know the transmission is stock, it has a stock torque converter and 3.73 14 bolt rear. i would like to get $8000 OBO. i may consider trades plus some cash.




i have some pictures of the interior and passenger door somewhere, when i find them i will post them.
i have decided to sell my 454SS and invest my money elsewhere. it is a 1990 model with 80K miles. the motor has been bored .030, has a small cam (not sure of the specs, it was in there when i bought it), edelbrock intake, full MSD ignition, Harland Sharp roller rockers, Thorley tri-y headers, with a flowmaster 40 series muffler and cut-outs. it has a 2/4 drop, welded in roll pan, smoothie front bumper, spray in bed liner and molding removed. the interior has a B&M mega shifter and aftermarket stereo but is stock other than that. it needs a headliner (or at least needs it reglued) and the passenger side door needs some body work or new skin (has some bondo in it that was revealed when taking off the molding and a couple of dents that could probably be pulled out with the right tools) and the front bumper is still in primer and needs to be painted. i may have the headliner and door fixed before i sell it but im not going to guarantee it. as far as i know the transmission is stock, it has a stock torque converter and 3.73 14 bolt rear. i would like to get $8000 OBO. i may consider trades plus some cash.




i have some pictures of the interior and passenger door somewhere, when i find them i will post them.
Last edited by 454navyss; Jul 29, 2009 at 03:08 PM.
Trending Topics
#9
Thread Starter
TECH Junkie
iTrader: (46)
Joined: Jul 2007
Posts: 3,106
Likes: 2
From: Providence Village, TX
pics of the dent in the passenger side door


and the interior. the megashifter is in the truck and i have the plastic cover for it, its just not on it. the wiring has been cleaned up and the cup holders under the dash were taken out for the shifter




and the interior. the megashifter is in the truck and i have the plastic cover for it, its just not on it. the wiring has been cleaned up and the cup holders under the dash were taken out for the shifter




