Trucks and SUV Classifieds All Makes and Models ONLY Trucks and SUV's

2000 s-10 rcss 2wd $3,500 obo

Thread Tools
 
Search this Thread
 
Old Aug 31, 2009 | 11:26 AM
  #1  
silver-mod-o's Avatar
Thread Starter
Hunt&Fisherator
iTrader: (15)
 
Joined: Nov 2005
Posts: 14,314
Likes: 17
From: SETx
Default 2000 s-10 rcss 2wd $3,500 obo

Trying to downsize a bit in the vehicle dept. The truck has been great and I'd drive this thing ANYWHERE without a second though, I have in fact

As of right now its sitting on 150K miles and runs great, a few months ago I replaced all the front end parts that these trucks normally have issues with. Balljoints, idler arm, shocks, and new front rotors/pads. The tires were also replaced about 8 months ago with Cooper Cobra 255/60-15's on the rear and Cooper 205/75-15s on the front. Its lowered 3/3 with drop coils and blocks but can be put back completely stock if the buyer would like. Its a 2.2L 4 cyl 5 spd manual truck, not a heavy hauler, but gets 24-25mpg consistantly with mixed, probably a hair over 26 strictly hwy driving. Great commuter/work truck.

The only thing I've changed is a K&N drop in filter when I did the tune up with new plugs/wires, O2 sensor, and PCV valve. Its a dark red exterior color and I'd call the body about a 6/10, and about the same for the interior. Under the hood it looks like a yr old truck...

Give me a ring with any questions anytime at 409-201-7005 (cell)


Last edited by silver-mod-o; Aug 31, 2009 at 03:05 PM.
Reply
Old Aug 31, 2009 | 12:02 PM
  #2  
texasbullseye89's Avatar
TECH Enthusiast
iTrader: (5)
 
Joined: Jan 2009
Posts: 505
Likes: 0
From: Huntsville, Tx
Default

Hmmm....Thought we had plans for this....
Reply
Old Aug 31, 2009 | 03:03 PM
  #3  
silver-mod-o's Avatar
Thread Starter
Hunt&Fisherator
iTrader: (15)
 
Joined: Nov 2005
Posts: 14,314
Likes: 17
From: SETx
Default

yeah man, I'd love to have done the LS swap I'd planned on but its not in the cards right now. This is a dead reliable truck, I didnt want to take this one apart... I'll find a better candidate one of these days to build it
Reply
Old Aug 31, 2009 | 03:33 PM
  #4  
lownslo's Avatar
TECH Fanatic
iTrader: (3)
 
Joined: Aug 2005
Posts: 1,560
Likes: 0
From: Jxn, Miss
Default

From experience, very nice ride to someone who wants a great truck that looks good too.......just a lil tight for two 250lb 6'2 guys but other than that its perfect.
Good luck on the sale ben!
Reply
Old Aug 31, 2009 | 03:35 PM
  #5  
kbracing96's Avatar
TECH Senior Member
iTrader: (26)
 
Joined: Jul 2004
Posts: 9,485
Likes: 31
From: Oakland, OR
Default

Boy, I'd like to have that little truck, put a turbo on the 4 banger, run about 10psi on it and have me a fun little daily driver. Just wish it was in the budget.
Reply
Old Aug 31, 2009 | 04:03 PM
  #6  
Phantom's Avatar
11 Second Club
15 Year Member
iTrader: (16)
 
Joined: Sep 2006
Posts: 5,694
Likes: 50
From: The 405
Default

^^^sell that heat box and it would be
Reply
Old Aug 31, 2009 | 04:10 PM
  #7  
00Silv4.8's Avatar
TECH Junkie
iTrader: (10)
 
Joined: Oct 2007
Posts: 3,278
Likes: 1
From: Mesa AZ
Default

trade+cash for my truck?? haha, gonna need some help with the motor/trans swap tho
Reply
Old Aug 31, 2009 | 06:34 PM
  #8  
silver-mod-o's Avatar
Thread Starter
Hunt&Fisherator
iTrader: (15)
 
Joined: Nov 2005
Posts: 14,314
Likes: 17
From: SETx
Default

HAHA... I'd be willing to work on the price some for someone who's VERY SERIOUSLY interested. But I think even what its listed for is a good deal
Reply
Old Aug 31, 2009 | 07:12 PM
  #9  
texasbullseye89's Avatar
TECH Enthusiast
iTrader: (5)
 
Joined: Jan 2009
Posts: 505
Likes: 0
From: Huntsville, Tx
Default

it really is. if it was in my cards id take it off your hands even if it is high mileage, cause i know you baby that truck to death
Reply
Old Aug 31, 2009 | 11:26 PM
  #10  
kbracing96's Avatar
TECH Senior Member
iTrader: (26)
 
Joined: Jul 2004
Posts: 9,485
Likes: 31
From: Oakland, OR
Default

Originally Posted by DozerDan
^^^sell that heat box and it would be
I am, but I just bought a new plamsa cutter and TIG welder...
Reply



All times are GMT -5. The time now is 06:37 PM.