I can't wait to get these in the truck, it has been a long, well deserved wait for me....





John

 

Nice. Do share details!

 

3200 and Performabuilt? What size cam you running?

 

You got it

A comp(TSP) 224R 581 on a 112lsa

John

 

nice!

 

You will like the combo (see sig). I watch them remove and replace the bellhousing when the swap was done. One bolt was not coming out. They ended up taking an air chisel to knock the head off. Also, there was a slight issue with my tranny. You may want to check before you begin the install the length of the shaft where the neutral safety switch is mounted on. Mine had a car shaft when built and needed to be replaced before it could go back in. Fortunately there was a spare and the were able to swap it out (which involves opening up the transmission).

 

[QUOTE=Silver-Dollar;3910790]You will like the combo (see sig). You may want to check before you begin the install the length of the shaft where the neutral safety switch is mounted on. Mine had a car shaft when built and needed to be replaced before it could go back in.

I hope not, I will take a look b4 it goes in, thanks on the heads up..


John

 

John, that's really cool brother. That tranny came UPS? or freight? I sent u a PM. Let's see some vid of truck after it's installed, this kind--->

 

when you swap the bellhousing, make sure to heat up the torx bolts with a torch or you'll be breaking torx bits if they are off the shelf ones.

 

Will do thanks bra

Also it came UPS ground, it only weight 130 lbs.

John