I call Rancho and ask what shocks would work with a 3 in block in place of the factory block and they said "None". WTH! Just trying to see what guys are running with 3 in blocks. Everything I have read says 0-1" or 4". I want a good Shock and not an extension, just trying to see if a 4" lift shock would work on the back.

 

I have the +4 Pro Comp ES3000 shocks on mine.

 

How do you like the ES's?

 

go look at skyjackers, thats what i used to run , also had a set of procomps . both helped a lil, but still rode like hell. checkout the lift manufacters websites for their shock specs, or ebay. thats how i found mine

 

i run bilstein 5100s on my truck. I just use the factory 99+ shocks they work fine with a 2-3" block

 

+1000 bilsteins is the way to go, procomp shocks suck.

 

Exactly. Go with the Billsteins

 

The stock length 0-1 or the 4 inch Bilsteins?

 

0-1 for just a 3" block

 

I have Rough Countrys on the rear of mine with a 3 in block and they are a lot better than the stock shocks. Are there better, sure but probably not for 75 a pair. Now I just need to match a set for the front.