Did some upgrades getting ready for MECA
#1
Made some changes recently...then some more changes...it never ends.
Swapped the OEM HU for a Kenwood Excelon DNN990HD

Swapped the JL 12W6v3 for a Morel Ultimo

Swapped the RF 3Sixty.3 for a Mosconi 6to8 DSP and built a trim panel to mount it in the center console.

Bad pic but you can see how it sits.

Then decided to swap the Ultimo for a new Illusion Audio Carbon C12XL...these are just now off "waiting list" status so I was finally able to get one.

And last I was getting inconsistent voltage reading at my amps so I got rid of the single battery terminals, got some XS Power bus bars and Scosche Status S clamps and fixed that issue.

Now to break in the new sub and get it tuned again...gonna compete in MECA Modified Street class this year. The rest of the system is Focal Utopia Be No 7 3 way components and a pair o Mosconi As 200.4 amps.
Swapped the OEM HU for a Kenwood Excelon DNN990HD

Swapped the JL 12W6v3 for a Morel Ultimo

Swapped the RF 3Sixty.3 for a Mosconi 6to8 DSP and built a trim panel to mount it in the center console.

Bad pic but you can see how it sits.

Then decided to swap the Ultimo for a new Illusion Audio Carbon C12XL...these are just now off "waiting list" status so I was finally able to get one.

And last I was getting inconsistent voltage reading at my amps so I got rid of the single battery terminals, got some XS Power bus bars and Scosche Status S clamps and fixed that issue.

Now to break in the new sub and get it tuned again...gonna compete in MECA Modified Street class this year. The rest of the system is Focal Utopia Be No 7 3 way components and a pair o Mosconi As 200.4 amps.
Thread
Thread Starter
Forum
Replies
Last Post
iregret
GM Drivetrain & Suspension
12
Sep 7, 2015 01:20 PM




