I installed a ScyTek Astra 4000RS alarm
ScyTek Astra 4000RS-2W Remote Start 2-Way Car Alarm

and bought this interface
Omega DB-GMDLBP (dbgmdlbp) Databus Doorlock, Alarm, and Passkey/

I hooked everything up, and programmed the interface, but all the door locks still do not work with the aftermarket alarm fob

is there another process I have to do? Such as de-programming the stock key fob or something?

 

could it have to do with me having VATS removed from the PCM?

wires that I do not have hooked up to the bypass module are
door trigger output
dome light input

wires that are not connected on alarm side
factory disarm (module should do this..)
dome light
door input

the unlock/lock function is going from the alarm to the bypass module.. which should be sending a signal through the data bus....