SDPC is having a great Christmas sale with pricing good through the 1st of the year.

1st up are our cam kits. We are offering you kits with three different spring setups to match whatever cam you buy. All of these kits will include 16 hardened chrome-moly pushrods, a set of valve springs, and a Comp Cams hydraulic roller cam. This sale is good not only on our in house shelf cams, but also on custom grinds to meet whatever needs you may have. Shipped prices are good in the lower 48 states only.

$550 shipped - This kit will use the PAC 1218 springs that are good to .600" lift. This kit will also include a set of hardened pushrods and the Comp Cam of your choice. Custom grinds included.

$600 shipped - This kit utilizes the newer PAC 1211x spring set. These are beehive springs that are good to .625" lift. This kit will also include a set of hardened pushrods and the Comp Cam of your choice. Custom grinds are included.

$650 shipped - This kit uses the PRC .650" spring kit. This is a dual spring and the kit also includes new seats, valve stem seals, and titanium retainers that are required upon installation. This kit will also include a set of hardened pushrods and the Comp Cam of your choice. Custom grinds are included.


The basic gasket kit including front cover gasket, front crank seal, two water pump gaskets, and a new GM crank bolt is on sale for $49.99

If you would like to change to the SDPC reusable crank bolt, the charge is $10 on top of the $49.99. The price outright for this bolt is normally $21.99!

-------------------------------------------------------------------------

Next up is the LS3 top end kit. We want to make it easier and cheaper than ever for you 6.0+ guys to get set up with the LS3 heads that you've been wanting. And we don't want to get you set up with just any LS3 heads, we want you to install our SDPC CNC ported LS3 heads that have proven to be some of the best performing ported LS3 heads on the market.

$1825 shipped - The basic kit will include our CNC ported LS3 heads, complete with .650" capable dual springs and Ti retainers, two rocker pedestals, 8 factory LS3 offset intake rocker arms, a GM LS3 intake manifold that is complete with factory fuel rail and 34# injectors. For a limited time this kit will sell for a CRAZY LOW $1825 shipped!

If you need a 92mm throttle body, we can also include a cable operated Nick Williams billet aluminum throttle body, the best on the market, with the appropriate throttle cable bracket and the price comes out to $2150 shipped

If you need larger injectors, we can switch out the 34# to 56# for $150. Both of these sets are LS2 style plugs, please keep in mind the adapters you might need. We keep those in stock as well to aid you with a friendly one stop shop

Please feel free to message me with any question, or give me a call at 800-456-0211 extension 358 to order!

-Jesse


----------------------------------------------------------------------

Please feel free to give us a call or shoot us a PM to discuss the best cam for your application and we can help you decide if one of our in house cams suits your needs or if we should put together a custom grind for you. This price is good for custom grinds as well as our shelf stock grinds, and even for a custom cam ground with specs you provide if you have already chosen what you are looking for. This is only a small sample of the cams we use daily, and we are more than qualified to put together a custom grind cam for you no matter what your application may be!

Some of our most popular LS cams are the
Z+221 - 221/226 .565/.560 114lsa
SD0130 - 230/236 .610/.612 115lsa
ST2 - 226/234 .610/.625 114lsa
ST4 - 232/246 .595/ .614 115

Our popular truck cams are the
HT1 - 214/218 .555/.562 111lsa (engine dyno in a stock 6.2 here http://i77.photobucket.com/albums/j6...0-500602-1.jpg)
HT4 - 224/236 .581/.602 116lsa

And of course some of our bigger cubic inch cams, The Super Stick line
SS1 - 236/248 .601/.615 112lsa
SS2 - 238/247 .640/.610 114lsa
SS3 - 240/254 .609/.595 112lsa
SS4 - 248/262 .614/.596 113lsa

 

dang thats some good deals right there!

 

Thanks skeet, still available guys!

 

man wish i would of waited to do all my mods till now GL with some sales great prices

 

Still got this deal?

I need the cam install gasket/crank bolt kit as well as a set of yellow ls6/ls3 springs and maybe factory seats/valve seals....

Lmk what you can do for me
Thanks
Eric

 

Till when is this sale Sd??

 

I'm looking at buying a cam if this deal is still going?