I was there from 7:30-12:30, and made 2 passes because it was packed!

Here are the results:
60'-2.01
1/4-13.5
mph-101
tires @ 17psi, thought i may have been spinning

60'-2.00
1/4-13.5
mph-101
tires @ 12 psi, i know i didn't spin that time

i think my TC is killing me. I believe I'm going to order a Yank 3000 or 3200 Monday. Let me know what you think. It pulls really hard. Once my buddy and i got out of the hole he didn't gain any more on me (he ran a 12.89 eventually). I think if i come out the hole harder it will make a huge difference

 

go with a 3200 converter for better results.... that converter is surely not doing its job... the 60' says it all...

 

yeah, my vette had a 3500 TCI and it felt waaay better than this one. this one feels too close to stock

 

I didn't do much better 13.11@101, don't think the clocks were right ahaaaa

 

what were your 60's?

how do you like the 3800PI?

 

his 60's are usually 1.7x's and 1.8x's, a converter that size would be awesome in your truck...

 

1.81 60'

 

If you go for a yank 3000tt, I got one for sale for $460 NIB...Should stall a little higher than 3000 behind that cammed 6L.

What is the 3k stall you have now? A reflashed stock one? Do you know the str?

 

It's a reflashed stock TC. I should have known better than to buy it. Lesson learned.

Don't know the STR.

I might get back to you on the TC. I was kinda looking at the billet Yank 3200

 

If it's a stock reflashed one...should be 1.9str. I bet that one you have is really loose. Should see a decent gain with either converter. Let me know if you want the 3000. I am in Deer Park.