That over the axle looks outstanding! Well done Sean & Company!!

Cant wait to get that on the truck, it needs an exhaust makeover.

Chad

 

Hey Sean, what is the length of those mufflers for the over the axle kit? 18", 20" shorter, longer?

Chad

 

Is the eta still 9/20 for the original dual exhaust?

 

Hey Sean, have a question for you, i recently swapped a 6.2 and 6l80 into my 08 yukon 4wd and the stock y pipe fits damn near perfectly, does the currently nnbs y pipe follow the same routing as the 4wd ypipe or is it different? Wondering if the y oipe would fit a 4wd 6l80, that had been swapped into a vehicle that originally had a 4l60!!

 

sharpshooter: We are hopping the true dual exhaust and new Y-Pipes come in by the end of the week. That was our last eta.

Wolftrk99: Our new 07-13 6 speed auto y-pipes should fit in both applications yes. We will sell the same y-pipe for both vehicles.

Thanks
Sean

 

I just installed a set of speed engineering lts on my 03 tahoe and the spark plugs wires on the driver side hit the header, what wires is everyone using to correct this

 

I have msd wires on mine and the boots rest on the headers but are holding up fine

 

The boot on the msd wires can be "bent" away from the header. I mean, they won't make a 90 degree turn, but they will bend some and not affect the wire or plug. Not sure if any of the other brands have this ability but have had the msds on my car for years now.


These are also a great solution and come in many colors...

 

Very sorry for the delays guys. Our true dual exhaust was scheduled to be delivered the middle of this month. There has been several shipping delays that have extended the wait time much more than we had expected. We are 99% sure we should have these ready to ship the week of the 3rd. Very sorry again..

Sean

 

The wires for an 07-09 5.3 have a 90 degree bend on the end that come in handy for routing wires where you want them...