When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
We just got our 1999-13 truck true dual exhaust prototype back in for fitment verification. Came back looking pretty sick. Thought you guys would want to see whats to come. If fitment goes smoothly eta is approx 3 months out for our first batch of them.
The exhaust will bolt up to all of our truck longtube headers from 1999-2013, single, crew, and extra cab trucks.
No other changes were made to the vehicle besides the true exhaust swap. Headers were already installed. The thing we were most surprised with was the torque gain across the board. It didn't loose any bottom end. The larger 3" exhaust actually gained torque across the board.
(9/6/2016)
Just arrived, here is a pic of the rear exit prototype. Everything will look the same except the natural steel will be polished as well. If everything fits good we should have the rear exit kit available by December or January.
Thanks
Sean
Last edited by Speed Engineering; 02-04-2017 at 12:02 PM.
06murder: We dont have a price yet, but we're trying to keep it under 400.00. Its a custom muffler we had made for us. Straight through design with thick insulation.
black00chev: Good. One of the trucks being test fitted on is my personal 2008 4x4 crew cab.
07-02-2015, 11:35 AM
Speed Engineering True Dual Exhaust Prototype..
