Carrier2

Thanks for the find. I like those.

I have found some centerlines on ebay for a good price, I may have to reconsider.

SnakeOiler

iTrader: (6)

sorry I didn't see this thread earlier.

I'm running a 295/45/20 on the rear with 20x10 and 7" backspace.

I took some pics with the rear mounted on the front for someone else, check out this post: https://www.performancetrucks.net/fo...3&postcount=14

I normally run 20x8.5 w/6" backspace on the front, mounted w/265/50 - pics here: http://photobucket.com/albums/y28/SnakeOiler/Vehicles/Silverado/Exterior

Carrier2

Thanks Snakeoiler. Your truck looks great. If there was just a little more clearance that would be me. But I guess that is a little too close. Oh well I guess that makes my choices easier.

agreif

iTrader: (4)

I've got 295/45/18 mounted on my truck (18x9.5) with a 2" shackle and hotchkis sways, but that is going to be about an inch shorter than your setup.

Carrier2

The main reasons I liked that size is how close to stock the overall diameter was, the width of the tire and the brands of tires.

What is the overall diameter of the 18?

agreif

iTrader: (4)

28.5 both measured and calculated. About 5% off from the stock 2wd wheels I had on before.