I really like it but not a big fan of Pewter. Nic truc though.

lK

 

inche Homemade kit! it still needs like 2"5 inches more in the back

 

would definately bring the back down no less than 1". looks good though already.

 

Looks great man! I started with a 3/5 on mine and wanted it lower in the rear too. I'm was running 3" coils up front and 2" hangers, 2" shackles and 4" leafs. I added the hangers to lower the rear more but that was at about 7 or more inches in the rear and was too much. When I first dropped it my shackle was set to 1". So to fix the drop I took the shackle off. With the 2" hangers mine actually sets at about 6.5 now from the measurements I took. I don't know how that happened but for some reason it sits lower with the hangers than the shackles did. Here's a pic of it when it was at about 8" in the rear. As you can see it isn't level at all! LOL I was tucking just a little tire in the back. I had to roll my fender lip to make it work.

I don't have any pics of it after I fixed the drop though, but it sits completely level now. But with the setup I have now it rides like ***!! Mostly due to the coils. Sometime this year I'm either going to drop the front to a 4 using LCA's and install a flip kit out back and leave my 2" hangers on for an 8 out back or I'm just going to bag it. Prolly bag it though!

 

Bag That Bitch!!!!!!!!!!!!!!!!!!!!!!!

 

I pulled the helper spring out of mine and it brought it down about 3/4 of an inch but very noticeable. So it looks alot more level now than it did. My ride didn't change at all except it bottoms out a lil bit easier now, but it is bearable.