Racing and Kills Forum Be smart and safe!

A Little Harley Kill

Thread Tools
 
Search this Thread
 
Old Jan 31, 2006 | 07:15 PM
  #1  
Okie5.3's Avatar
Thread Starter
TECH Resident
iTrader: (1)
 
Joined: Aug 2004
Posts: 871
Likes: 0
From: Oklahoma
Default A Little Harley Kill

Got into a little street squirmish with a S/C Harley truck this afternoon. The guy who owns it is a equipment vendor for the company I work for, and we had been going back and forth with each other for the past couple of months about the whole Chevy vs Ford thing.

Well today we were finally able to meet up for some fun. We decided to run down the highway and settle this. He was up ahead of me doing about 60 or so and as I was coming up on him and let off to get beside him, he stomps it. He immediately puts 2-3 car links on me. I'm thinking, damn this thing is fast. About 90 I start to reel him in slowly, but there isn't going to be enough time because of upcoming traffic, so he let's off and I fly him doing about 115.

We pull over at the store up ahead to talk about it and I'm like let's do this from a dig or a slow roll...at the same time. So we ease out on the highway and from a 9 - 91mph roll I hand him his azz. I jumped him by 2 links from the start and rolled it out to almost 3 where it stayed until we let off.

From a 60-70 start I couldn't believe he pulled me so hard in that heavy azz truck of his. Do these trucks pull that good up top? Down low it was lacking somewhat.
Reply
Old Jan 31, 2006 | 07:26 PM
  #2  
1979rs/z28's Avatar
12 Second Club
iTrader: (21)
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: Beaufort NC
Default

good kill, i do like those s/c fords though
Reply
Old Jan 31, 2006 | 07:27 PM
  #3  
02sierraz71_5.3's Avatar
TECH Junkie
iTrader: (2)
 
Joined: Oct 2004
Posts: 3,473
Likes: 1
From: Cornelius, NC
Default

the guy that runs the parts department where I work got one, to pull his bikes. Ive been trying to get a race but then again its not good to make the boss look bad.
Reply
Old Jan 31, 2006 | 10:10 PM
  #4  
203Cree's Avatar
TECH Addict
 
Joined: Jul 2005
Posts: 2,515
Likes: 0
From: Olathe, KS
Default

Originally Posted by Okie5.3

From a 60-70 start I couldn't believe he pulled me so hard in that heavy azz truck of his. Do these trucks pull that good up top? Down low it was lacking somewhat.
60 is a very nice speed to go from, especially if he had the OD turned off. Perfect for our powerbands. Now, over 80 or so, aero kicks in and kills our flying bricks.

And you probably jumped him from the dig due to wheelspin. These S/C trucks are worthless on street tires anywhere below 35 mph. They'll just haze them. Even stock.

Nice kill.
Reply
Old Jan 31, 2006 | 11:05 PM
  #5  
ap2002's Avatar
TECH Senior Member
20 Year Member
iTrader: (8)
 
Joined: Sep 2004
Posts: 6,411
Likes: 0
From: Houston, Texas
Default

good kill, I raced one last year on the freeway, all from 60mph rolls about 6x... he took 3x and I took him 3x... either I was at his back bumper or he was at my back bumper everytime...... that was when I only had exhuast and k&n drop in filter...no tune.... mine would shutdown at 97mph and he woul fly by me... stop and talked for a little and he said man I thought you really had something until your truck would shut off!!!.. real cool guy he said it was stock and had a pulley and some other stuff on order.... there is this one harley that goes to the streetracing that has been trying to race me but we havent yet... hope he'll be there tomorrow to settle this down...
Reply
Old Feb 1, 2006 | 08:38 AM
  #6  
Okie5.3's Avatar
Thread Starter
TECH Resident
iTrader: (1)
 
Joined: Aug 2004
Posts: 871
Likes: 0
From: Oklahoma
Default

Originally Posted by 02sierraz71_5.3
the guy that runs the parts department where I work got one, to pull his bikes. Ive been trying to get a race but then again its not good to make the boss look bad.
you're not gonna lay down for the boss are ya? j/k



They are pretty nice trucks, for a Ford anyway . I imagine with a pulley and a tune he would be handing me my azz.
Reply
Old Feb 1, 2006 | 11:48 AM
  #7  
98vortecbw's Avatar
Launching!
 
Joined: Nov 2005
Posts: 282
Likes: 0
From: Baytown (dirty bay) , TX
Default

Yeah those S/C trucks you need to run from a dig or from a really slow roll.... otherwise it will let them spool up those blowers. But yeah they are very nice trucks and im actually scared of those.
Reply
Old Feb 3, 2006 | 09:10 PM
  #8  
99Lightning's Avatar
Staging Lane
 
Joined: Dec 2005
Posts: 92
Likes: 0
From: Missouri
Default

Pretty much all a Harley is is a larger,heavier,and slightly lower powered Lightning.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dantheman1540
GM Drivetrain & Suspension
72
Nov 1, 2015 02:59 AM
lsxperformance
8-Lug Truck Performance
13
Sep 20, 2015 11:08 AM
Sjeverette3
GM Drivetrain & Suspension
11
Sep 2, 2015 01:32 AM
Hmguyton
INTERNAL ENGINE MODIFICATIONS
2
Aug 9, 2015 05:38 PM




All times are GMT -5. The time now is 04:56 PM.