welp tonight me and a bunch of buddies was up at walmart and decided we'd race to see who's truck was quicker. my truck is a 02 rcsb, bout a 2/4 drop (in guessing, not sure, its got springs in front and shackles and hangers in the back) 4.11 gears, stock motor, shift kit, vette servo, roll KMC 20's.

well first race was me against my buddy kaylob, he's got a 05 rcsb chevy with a 5.3, 4.11 gears, nelson tune, CAI, and exhaust. rollin 16x10's, not sure what the tires are.

well first we went from a 20 roll, 3rd horn and go, we only ran to about 65 before he left off, which i think was b.s cause i was slowly inchin on him, well he won by half a truck, then he wants to go from a dead, well we go, 3rd horn and go, i spin all through 1st and a lil bit of 2nd, he's about a truck length ahead of me by time we hit 3rd then he slows back down , again.

well 2nd race was my buddy josh, he's got a 2000 rcsb chevy, superchips programer, 3.73's, and some other stuff that i cant think of right now.

well we go from a 20 and i spin and kick sideways slightly when i hit 2nd and pull bout 3/4 of a truck then at 3rd im a full truck and still pullin so i hit the brakes.

all and all for a stock motor and all im happy with it, just gota do something soon to get it faster!!!

 

you're truck is almost completely stock, with 20"s and it spins that much?

This must be totally different between a RC and EC as far as traction goes...

 

only performance far as motor that i forgot to mention was my exhaust, i have a 1 in 2 out flowmaster, thats it, motor is 100% stock that was put in when i bought the truck so i know for a fact its stock

 

Nice runs!

I can break em loose from a thirty roll and i only have 3.73's

 

I can let off my brakes from a stoplight, give it gas, and it barks the tires with my v6.Thats with the 295/50/16s.

Now with 255/55/16's, I can blow them away If I give any type of launch to them.


When my cam, springs, and gears go in, I hope to be frying two 295's.

 

I need to make a video of my truck doing a burnout hehe

 

I believe in the proper warming of tires lol

 

nice run, what all you got done ? oneday after going bankrupt i'll be in the 12's hopefully lol

 

Mine used to jerk sideways on a 1-2 shift. and then I picked up these Ventus h06's and fixed that problem.

 

me and vicious need to race. Our trucks mods are practically identicle for the most part.