PerformanceTrucks.net Forums

PROJECTS GALLERY Vehicle builds | Engine Swaps | Conversions | Installation write ups |
Sponsored by:
Sponsored by: CARiD

Turbo 4x4 K5

Thread Tools
 
Search this Thread
 
Old Jan 3, 2015 | 12:13 PM
  #11  
5.3Okasai's Avatar
5.3Okasai
Thread Starter
Staging Lane
iTrader: (1)
 
Joined: May 2006
Posts: 92
Likes: 1
From: Moss Bluff, Louisiana
Default
It's an eBay one. 24x12x3
Reply
0
Old Jan 3, 2015 | 12:30 PM
  #12  
goinbrokez28's Avatar
goinbrokez28
On The Tree
iTrader: (1)
 
Joined: Mar 2010
Posts: 162
Likes: 0
From: Drifting in a kayak
Default
Thanks for sharing!
Reply
0
Old Jan 3, 2015 | 04:25 PM
  #13  
5.3Okasai's Avatar
5.3Okasai
Thread Starter
Staging Lane
iTrader: (1)
 
Joined: May 2006
Posts: 92
Likes: 1
From: Moss Bluff, Louisiana
Default
No prob
Reply
0
Old Jan 6, 2015 | 12:42 AM
  #14  
iregret's Avatar
iregret
Charlie Murphy!
iTrader: (4)
 
Joined: Dec 2010
Posts: 1,057
Likes: 14
From: Oregon
Default
Nice build! Just curious, any idea what mpg you're getting? 12 or so I'm guessing...
Reply
0
Old Jan 6, 2015 | 04:41 AM
  #15  
5.3Okasai's Avatar
5.3Okasai
Thread Starter
Staging Lane
iTrader: (1)
 
Joined: May 2006
Posts: 92
Likes: 1
From: Moss Bluff, Louisiana
Default
Honestly I'm not sure. The current rear end has 3.08 gears. So rpms are pretty low, it has a 31 gallon tank. I'll post it up next fill up.
Reply
0
Old Apr 6, 2015 | 12:35 AM
  #16  
dlc_racing's Avatar
dlc_racing
Teching In
 
Joined: Sep 2010
Posts: 4
Likes: 0
Default
Do you mind telling what you need to change to the 4l80 to transfer install mods you have to do i just bought a 87k also and i wanna use a 4l80 ls1but my modern transfer has the front driveshaft on the driver side and the truck use the passenger side one
Reply
0
Old Apr 6, 2015 | 01:57 AM
  #17  
glenntballard's Avatar
glenntballard
Registered User
 
Joined: Mar 2015
Posts: 21
Likes: 0
Default
Sweet rig right there! I'll surely be watching this build!
Reply
0
Old Apr 7, 2015 | 06:51 PM
  #18  
GRRR65GTO's Avatar
GRRR65GTO
TECH Enthusiast
 
Joined: Jan 2013
Posts: 547
Likes: 1
From: MA
Default
Real clean truck and build nice job

What boost and power are you making?
Reply
0
Old Apr 8, 2015 | 09:33 PM
  #19  
denalircsb's Avatar
denalircsb
Staging Lane
 
Joined: Jan 2014
Posts: 78
Likes: 3
From: Nanton AB
Default
Could you post up some more pics of the hotside?
Reply
0
Old May 14, 2015 | 11:28 AM
  #20  
5.3Okasai's Avatar
5.3Okasai
Thread Starter
Staging Lane
iTrader: (1)
 
Joined: May 2006
Posts: 92
Likes: 1
From: Moss Bluff, Louisiana
Default
Originally Posted by dlc_racing
Do you mind telling what you need to change to the 4l80 to transfer install mods you have to do i just bought a 87k also and i wanna use a 4l80 ls1but my modern transfer has the front driveshaft on the driver side and the truck use the passenger side one
Sorry I have taken so long to respond. I haven't been on in awhile. I used a NP208 transfer case. It came on the K5 and was already a passenger drop. All I had to change was the input shaft because the 80E was 32 spline out.
Reply
0



Advanced Search

All times are GMT -5. The time now is 07:01 AM.