My RCSB escarado ground-up
#12
I <3 compressor surge
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: pittsburgh, pa
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
ordered the vanity plate two weeks ago, now I just have to back it up!
making slow progress, got a pile of small stuff to go to powdercoat, spacers are made for the old body style 14 bolt to mount the dual piston tahoe/yukon brakes. Just finished welding the tubes to the housing and setting up pinion angle to weld on new perches
Was gonna hold out for 22's but got a deal on chrome 18's with 9 miles on them. $300 craigslist special! i figured for the price wheels are the easiest thing to change later, just need something to roll the truck around with for now.
should have some major progress pics coming soon
making slow progress, got a pile of small stuff to go to powdercoat, spacers are made for the old body style 14 bolt to mount the dual piston tahoe/yukon brakes. Just finished welding the tubes to the housing and setting up pinion angle to weld on new perches
Was gonna hold out for 22's but got a deal on chrome 18's with 9 miles on them. $300 craigslist special! i figured for the price wheels are the easiest thing to change later, just need something to roll the truck around with for now.
should have some major progress pics coming soon
#14
I <3 compressor surge
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: pittsburgh, pa
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
I havent updated in awhile. Got the chassis finally done. finally ready to put the cab and bed back on then off to paint.
Gettin ready to assemble the 402. Just a little engine **** to give me some motivation
Gettin ready to assemble the 402. Just a little engine **** to give me some motivation