My large frame front mount project with two videos
Feb 17, 2009 | 11:21 PM
#123
GFYS and STFU
iTrader: (8)
Joined: Jan 2007
Posts: 13,870
Likes: 4
From: Here and sometimes there too.
****...Henry told me you were playing with a T6 flange but jebus!!! 
I got a good book for you when I get home about building turbo manifolds...hopefully I'll get there in time to give it to you before it's too late! (you and henry will have to share)
Also, having ridden in my truck, you'll remember when my power actually kicked in (the so called "boost-threshold" or "tip-in"). Which is why my truck feels like it's always on Nitrous past a certain point.
You can manipulate the "tip-in" to some extent with cams, tuning, etc... but IMO I don't think you'll have much problem with lag but your gonna have to sacrifice where you'll see the "boost-threshold" kick in.
I got a good book for you when I get home about building turbo manifolds...hopefully I'll get there in time to give it to you before it's too late! (you and henry will have to share)
Also, having ridden in my truck, you'll remember when my power actually kicked in (the so called "boost-threshold" or "tip-in"). Which is why my truck feels like it's always on Nitrous past a certain point.
You can manipulate the "tip-in" to some extent with cams, tuning, etc... but IMO I don't think you'll have much problem with lag but your gonna have to sacrifice where you'll see the "boost-threshold" kick in.
Feb 17, 2009 | 11:47 PM
#128
Feb 18, 2009 | 12:15 PM
#129
Thread Starter
How do I change this text
iTrader: (26)
Joined: Jan 2005
Posts: 7,294
Likes: 2
From: Behind the TIG welder
Well be grinding away this morning... here is a little update....
Starting over (again)
Well that's it so far. Just need to build and tack the cross over, cut out number 2 exhaust runner figure out where the waste gate is going to fit
And the small down pipe... Then weld it all up ....
Starting over (again)
Well that's it so far. Just need to build and tack the cross over, cut out number 2 exhaust runner figure out where the waste gate is going to fit
And the small down pipe... Then weld it all up ....
