Finaly get to use the ls-6...
#1
14 Second Truck Club
Thread Starter
iTrader: (33)
Join Date: Dec 2007
Location: Florida
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Finaly get to use the ls-6...
Couldn't pass up the deal so I am putting some power in the GMC..
motor is a LS-6 with forged crank....rods and Mahle pistons...11.1 ratio
gonna have patriot cam...225/229..581/591 on 114
killer jesel rocker set up.... 243 heads...set of the gm cnc ported ones
42lb injectors..... gonna use the truck intake til i can replace it with 90mm set up. Trying to get funds together to get tranny now ... If i cant motor will go in and hope tranny holds for a little while.... converter is going to be rebuilt too
rockers...
cnc...?
bottom end..
motor is a LS-6 with forged crank....rods and Mahle pistons...11.1 ratio
gonna have patriot cam...225/229..581/591 on 114
killer jesel rocker set up.... 243 heads...set of the gm cnc ported ones
42lb injectors..... gonna use the truck intake til i can replace it with 90mm set up. Trying to get funds together to get tranny now ... If i cant motor will go in and hope tranny holds for a little while.... converter is going to be rebuilt too
rockers...
cnc...?
bottom end..
Last edited by fastgmc53; 02-03-2011 at 07:11 PM.
Trending Topics
#9
14 Second Truck Club
Thread Starter
iTrader: (33)
Join Date: Dec 2007
Location: Florida
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
It still is a driver...I like some low end power...I love the way my ASA cam sounds now but not much down low...granted the lack of headers is KILLING me but that will soon be fixed. I also have a plate kit laying around