Before anyone flames, no I'm not using a plate, not yet anyway. I'm going to use a nozzle, but the intake tube in a GM truck has a pretty solid 90* bend at the TB. So I was hoping someone would have pictures, or a good solid idea where to drill and tap for the nozzle. I understand pointed at the TB would be best, but there's no room.

 

Ive done it on 2 stock intake tubes.. You gotta get creative lol

 

Sorry, should specify I have a 4 inch aluminum intake tube.

 

The closer the nozzle is mounted to the tb, the harder it will hit. Just aim it in the general direction and it will be fine. No exact science

 

i have always heard that it needs to be at least 6" away from the throttle bodie. Thats what i did when i had a nozzle. O yeah i have a plate for sale if your interested. Plates are alot better for distribution and power.

 

I understand. I'm a broke college student so it's hard to acquire parts, and being in Seattle, I want to get a few 1/4 mile runs in before the rainy season sets in. I'll send you a pm.