NITROUS OXIDE System Designs | Installation| Wet/Dry/Direct Port

First Time Setup

Old Oct 11, 2015 | 12:03 PM
  #1  
GM1697's Avatar
Thread Starter
Moderator
iTrader: (1)
 
Joined: Oct 2014
Posts: 1,568
Likes: 12
From: in MA or SC
Default First Time Setup

If I were to be looking to do a simple nitrous setup (100-150shot) would this get the job done? and would I need anything else?

Proton Plus Kit with Bottle
PROTON PLUS NITROUS SYSTEM W/ 10LB BOTTLE

TPS WOT/Window Switch
NX DIGITAL RPM WINDOW SWITCH (Now for all ignition types - No RPM chips required)
Reply
Old Oct 11, 2015 | 12:15 PM
  #2  
Jake75's Avatar
TECH Resident
iTrader: (2)
 
Joined: Mar 2013
Posts: 808
Likes: 5
From: Houston
Default

yup that will take care of it! make sure you pull some timing out of your tune....typically 2 degrees for every 50hp you plan to spray!
Reply
Old Oct 11, 2015 | 04:43 PM
  #3  
Fast6.3's Avatar
Staging Lane
 
Joined: Feb 2012
Posts: 78
Likes: 0
From: El Paso Texas
Default

to pull timing the lnc2000
Reply
Old Oct 11, 2015 | 05:28 PM
  #4  
GM1697's Avatar
Thread Starter
Moderator
iTrader: (1)
 
Joined: Oct 2014
Posts: 1,568
Likes: 12
From: in MA or SC
Default

Timing will be done thru an alternate tune I'll load at the track.
Reply
Old Oct 16, 2015 | 04:36 PM
  #5  
GRRR65GTO's Avatar
TECH Enthusiast
 
Joined: Jan 2013
Posts: 547
Likes: 1
From: MA
Default

You cheater you took the easy way out to make power
Reply
Old Oct 17, 2015 | 08:55 PM
  #6  
GM1697's Avatar
Thread Starter
Moderator
iTrader: (1)
 
Joined: Oct 2014
Posts: 1,568
Likes: 12
From: in MA or SC
Default

Originally Posted by GRRR65GTO
You cheater you took the easy way out to make power
The truck daily's perfect with the current power, just need something extra to keep up with you and diesels at the track.
Reply
Old Oct 19, 2015 | 09:20 AM
  #7  
Nitrous Express's Avatar
Former Vendor
 
Joined: Sep 2011
Posts: 125
Likes: 0
From: wichita falls
Default

That will make for a great setup to start with!! A lot of people like to add a bottle warmer, pressure gauge and purge kit later on down the road.
Reply
Old Oct 20, 2015 | 11:43 AM
  #8  
GM1697's Avatar
Thread Starter
Moderator
iTrader: (1)
 
Joined: Oct 2014
Posts: 1,568
Likes: 12
From: in MA or SC
Default

Originally Posted by Nitrous Express
That will make for a great setup to start with!! A lot of people like to add a bottle warmer, pressure gauge and purge kit later on down the road.
Do forum members get any discounts?
Reply
Old Oct 21, 2015 | 03:42 PM
  #9  
XBlackXCheavyX's Avatar
Launching!
iTrader: (1)
 
Joined: Oct 2013
Posts: 229
Likes: 2
From: Henderson, KY
Default

I've been eye balling this kit to for some cheap power until I funds allow f/I. Let us know if you pull the trigger.
Reply
Old Oct 25, 2015 | 02:53 AM
  #10  
megabuddys's Avatar
Staging Lane
 
Joined: Feb 2013
Posts: 99
Likes: 2
From: Minnesota
Default

Nitrous express makes nice stuff, but I recommend the ZEX wet kits. 3 wire hook up, built in programmable TPS WOT switch. Super easy to installl and very reliable. I have probably installed 20 of these kits. If you can afford it just get a bottle heater right away. I do not recommend the ZEX bottle heater, its slow and doesnt get very hot. These work very well below.

https://www.dynotunenitrous.com/stor...p?idproduct=17
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:23 AM.