Im selling a Canon projector that retail for about 700-950$

Ive watched about 2 movies on it, projection quality is good i say this because i didnt have that big white screen you roll down, i was watching on my wall which has this rough surface.

I got it from my uncle, he said he didnt use it since he got a plasma.

If it wasnt that i needed money i wouldnt sell it but, i want a blackbear tune
375 obo.







Specifications
Projector Specifications
Imaging Device
0.7" p-Si TFT active-matrix with Micro Lens Array
Native Resolution
XGA
Brightness
1500 ANSI Lumens
Uniformity
85%
Contrast
500:1
Digital Keystone (Vertical)
+/- 30 degrees (Manual)
Optics
Projection Lens
VGA, SVGA, XGA, SXGA, HDTV,DTV

8.6:1.4, Fixed
Zoom
1.6x manual
Screen Size
25" - 300"
Throw Distance
3.6 - 28.9ft (1.1 - 8.8m) / 100": 9.5 - 15.1ft (2.9 - 4.6m)
Throw Ratio: 1.44-2.25:1
Input Signals
Scanning Frequency
H:15 ~ 100 kHz , V: 50 ~ 100 Hz, Dot clock: 108 MHz
Analog PC Input
VGA, SVGA, XGA, SXGA, HDTV,DTV
Video/S-Video Input
NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM
HDTV: 1080i, 1080i/50Hz, 720p, 576p, 480p, 480i/60Hz
Component Input
S-video, Composite, VGA, Audio, Component
Terminals
(Input) Stereo Mini Jack
1 Stereo Mini Audio, 1 Service Port (DIN 8 Pin)
(Output) Stereo Mini Jack
1 RGB (D-Sub 15 Pin), 1 Stereo Mini Audio
Built-in Speaker
36 dB
Lamp
Network
RS232, IR
Lamp Life
150W NSH
Remote Control
Sensor
Yes
Ratings
Power Consumption(Normal/Quiet/Stand-By)
AC 100 to 240V , 50/60Hz
Power Voltage
100-240V, 50-60 Hz Worlwide
Temperature Operating
41° to 95&degF (5° to 35&degC)
20% to 80% humidity (non-condensing)
Temperature Storage
14° to 122&degF (-10° to 50&degC)
20% to 80% humidity (non-condensing)
Dimension (WxHxD)
12.2 x 10.4 x 4.3 in.
Weight
6.4 lbs (2.9kg)
Warranty
3 Years Parts & Labor, 120 Day Lamp Life

 

anyone?