harland sharp rockers
#2
PT's Slowest Truck
iTrader: (19)
I've been running their 1.7's for a few years and they haven't given me any problems. The swipe pattern was perfect on the valve tip when I installed them also. I did relief the cylinder heads ever so slightly on the side where the pushrod goes as the clearance was very tight, but besides that they were a direct bolt in.
#3
TECH Enthusiast
iTrader: (13)
Join Date: Jul 2007
Location: South of South Ft Worth
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
i've been running the 1.8's for a little over a year and never had any problems on the rockers themselfs just make sure to check your pushrod length as it may differ..
I've hears some ppl say stay away from them but never have heard any proof of why. So i say for the price its a good investment.
I've hears some ppl say stay away from them but never have heard any proof of why. So i say for the price its a good investment.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
KINGCYCLES
GM Parts Classifieds
1
10-02-2015 10:21 AM
5.3lSilverado
GM Engine & Exhaust Performance
4
09-20-2015 06:48 PM