The 420 is DONE!!!!!!!!!!
#261
Thread Starter
Tin Foil Hat Wearin' Fool
iTrader: (36)
Joined: Oct 2004
Posts: 23,204
Likes: 4
From: Austin, TX
Thanks here is the actual first video of it starting up where it is idled up a bit after James got through scanning it to make sure all the sensors were reading right. He is the one stepping out of the passenger side of the truck, big thanks to him for hauling his welder over to my place to hack up my pacesetter ypipe to clear the 80e pan



#264
Thread Starter
Tin Foil Hat Wearin' Fool
iTrader: (36)
Joined: Oct 2004
Posts: 23,204
Likes: 4
From: Austin, TX
No James Im waiting on my dad and Laurie to get ready then we are heading to texas roadhouse.
No Rihino its running the stock intake right now. Whenever you get a chance would please get those measurements I asked about no big hurry right now.
I hope it sounds better once I get the idle dropped down.
No Rihino its running the stock intake right now. Whenever you get a chance would please get those measurements I asked about no big hurry right now.
I hope it sounds better once I get the idle dropped down.
#265
Originally Posted by Rhino79
Hey can I get an autograph, I had no idea your dad was Paul Teutul from OCC!
JK, truck sounds good, did you use the 4bbl tb and the carb hat?
JK, truck sounds good, did you use the 4bbl tb and the carb hat?
James
#266
Whoo hoo!!!!
Great job guys.
Donno why that plug wasn't in the block. Sorry for the mess. Happened to me many years ago, but it was on an engine stand in the shop. Soaked my pant legs with 40wt.
Congrats on getting the engine up and running.
Richard
Great job guys.
Donno why that plug wasn't in the block. Sorry for the mess. Happened to me many years ago, but it was on an engine stand in the shop. Soaked my pant legs with 40wt.
Congrats on getting the engine up and running.
Richard
#269
Banned
iTrader: (4)
Joined: Oct 2003
Posts: 5,151
Likes: 1
From: From Houma La. Living n Ellisville Miss.
so how much does a motor build cost for them to leave one of the most important plugs out.you better pull the motor and send it back to the builderfor them to check all the bearings again,not go on the first start up.
but on the other hand congrats and hope you don't but i would pull it.
but on the other hand congrats and hope you don't but i would pull it.
#270
cost plus the oil spill..........
Royal Purple $6.99(x6)=$41.94
Permatex brake cleaner $5.99(x2)=$11.98
Castrol Super Clean $3.99
2 bundles of red rags $2.99(x2)=$5.98
500 gal of water $.03(500)=$15.00
City of Austin fine for the oily, soapy, contaminated water flowing down the driveway into a stormdrain........$550
Tally:$628.89
Richard, I'm not adding in labor from three people on a national holiday weekend...........
But you know what guys............,,,seeing this truck start, not catch fire and pull into the garage on its own power,
PPPPRRRRIIIIIIIICCCCCCCEEEEEEELLLLLLLLLEEEEEEEESSS SSSSSSSSSSS!!!!!!!!!LOL!!!!
James
Royal Purple $6.99(x6)=$41.94
Permatex brake cleaner $5.99(x2)=$11.98
Castrol Super Clean $3.99
2 bundles of red rags $2.99(x2)=$5.98
500 gal of water $.03(500)=$15.00
City of Austin fine for the oily, soapy, contaminated water flowing down the driveway into a stormdrain........$550
Tally:$628.89
Richard, I'm not adding in labor from three people on a national holiday weekend...........
But you know what guys............,,,seeing this truck start, not catch fire and pull into the garage on its own power,
PPPPRRRRIIIIIIIICCCCCCCEEEEEEELLLLLLLLLEEEEEEEESSS SSSSSSSSSSS!!!!!!!!!LOL!!!!
James
Last edited by closet red neck; Sep 2, 2007 at 09:21 PM.






