Tryed a search didn't find much

What length push rods will I need, who has em for the best price?

what are avarage gains with this cam on a turbo truck?

Thanks fellas!

 

Stock rods WILL work, but to keep the same lifter pre-load, you need rods that are .025 (7.425) longer since the cam has a .050 smaller diameter base circle. Couldn't tell ya where to get them, since i didn't use them. The gains will be from mid to mostly upper rpm range. Instead of falling off around 5800, will pull hard to 6200+.

 

You didn't have any issues with the stock length?
If I change them out should I go hardened?

You got the springs from SDPC right.

 

I didn't. It's up to you if you want hardened, might be more reliable in the long run, who knows...

yep on the springs

 

If you're gonna swap the cam, throw some hardened rods in while its apart.