tire size cause the abs/traction control/brake light?
#1
I bought my 12 it was lifted on 35s I removed the lift put a 275 55 20 on it and I have all these lights on. Will a different tire size do this?
#3
#7
Whoever lifted the truck had abs wire routed all fucked up on the rear it cut it I just butt connected it. Maybe that's why. I have a scan tool but it won't read abs. Can I ohm it out at the connector or anything
Trending Topics
#8
A quivk way to see if its producing a voltage is set your dvom to alternating voltage and connect to each wire then spin the wheel. You'll get some form of alternating current. But that's so inaccurate. I'd suggest finding someone to scan the abs while on a road teat
#9
When you butt connected the wires you probly added some resistance and the computer isn't seeing the signal wave form its supposed too.
Also continuity can be misleading cause a wire could be 99 percent broken but if one or two strands are still connected you'd have continuity
Also continuity can be misleading cause a wire could be 99 percent broken but if one or two strands are still connected you'd have continuity


