What AFR? Timing? I made my best numbers with the 2.3 Lysholm with 11.6 AFR and 16 degrees timing on 93 octane. That was with the 3.65" pulley at sealevel.

 

With near 500rwhp, these should help nail down solid 60' times!

 

New times were better than I expected!

 

I just went 11.81@ 116.81 with a 1.62 60'

 

Suh-WEET!

 

Well done

 

awesome job building a fast truck!

what would be cool is if you could put together a time line,mods done and ETs all the way from the begining to now.

 

nice time

 

Thanks guys.

Good idea on the mod/ET progression, I'll put that together soon.

After I ran 11.81 I went out and had a custom 3" pulley machined because they aren't available for my blower. I haven't had it retuned for it yet but I started spraying meth to at least compensate a little to see what the added boost was like.



Needless to say it was enough to break 3 teeth of the Eatons spider gears!

Once I fix that, get a diff cover with bearing cap supports and a retune ill get new track times, I'm thinking they'll be sub 11.50's.

 

Took a little while but I got a new center section under warranty and got the 800lb springs tossed in no charge.