It's time to get a little more out of my daily. I'm going to slap in the biggest cam I can shove in my stock cube 6.2, yes I know that's not how you make power but, I have 2 "race trucks" already and pretty much just want a popcorn machine for a daily. Post up your cammed 6.2 videos and specs along with dyno numbers and or track times.

 

This is my street sweeper stg4 for ls3 heads works good na/ small shot nitrous under 200. 4000 stall needed

This is the Twister stg 2 n/a has great drivability 3200-3400 stall, 3600 recomended

This is the twister stg 3 n/a has decent drivability, 3600+ stall required

400$ Any of these or could custom spec one. They all clear stock bottom end and run very strong! The one in the tbss is about as large as I would care to go..

 

What's the specs on the street sweeper and the stg3 twister? Any videos of the stricter tuned?

 

I don't have any vids of it tuned in my phone. That car made 450/425 @ tire on a mustang dyno, dynojets show 500+ with it. It had 2" stainless works headers, and a airaid cai, as well as cam, comp dual springs with ti retainers, and upgraded factory rockers with trunions. It's a 235/244@.050 111lsa+5 .62x/.60x
Believe it or not drivability was very nice after tune, and was a blast to drive. It will start to lope under about 1500 so I recomend you raise the lockup settings for converter so it's not locked up under 1700 or so or whatever mph it may be in your computer.
If you pm me your email I'll send the tuned vid.