Help Pulling a engine
#11
Just did a 5.3 replacement in a 11' reg cab and I removed the intake, rad, rad hoses, fans, PS pump, alternator, A/C lines, and removing or tipping the top part of the rad support will give you all the room in the world to pull the motor.
I'm currently doing a complete 5.3/4L60E to 6.2/6 speed 4X4 swap and with the addition of removing the A/C condenser, support bracket for oil cooler and hood latch. I was able to install the complete 6.2/6 speed/transfercase in one piece.
I'm currently doing a complete 5.3/4L60E to 6.2/6 speed 4X4 swap and with the addition of removing the A/C condenser, support bracket for oil cooler and hood latch. I was able to install the complete 6.2/6 speed/transfercase in one piece.
Last edited by sledog; 09-15-2015 at 06:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ARC
GMT 800 & Older GM General Discussion
57
02-21-2022 10:54 AM
atxlt
Tuning, Diagnostics, Electronics, and Wiring
1
07-20-2015 11:06 PM