ok there is a person that thinks that the spe proflash is the s**t. he is saying that edit can and will not out perform the proflash. he needs to wake up.
http://www.fullsizechevy.com/forum/s...09#post1101409

 

watch out for the FSC Mod ****'s

 

That guy is a distributor for SPE, he's always talking up SPE. I tried a Proflash and sent it back, it came with a 30 day return policy. It made real good power and had three performance tunes, and you could tweek the timing like with a Predator and it had different trans settings. The truck shifted real well with it and made good power down low BUT, it shifted at the stock rpm's. You could pick the trans setting (like performance or tow) and it held the normal speed up shift longer (like the tow/haul does, which I liked) but you couldn't raise the shift points. I would have kept it if it had raised the shifts to like 5800 or even if it raised the second gear shift to match first gear (5600 vs 5200) but it didn't. I didn't like that, so I returned it with no questions asked per their policy. I never could figure out why GM had the 1-2 shift set for 5600 but the 2-3 shift was at 5200?
Jim
Jim

 

So he distributes for Proflash. Thats why hes talking it up. Maybe we need to get the designated Westers Cheerleader to post in there (Butch02). Im going to make an assumption that Wkdspd has never used Edit or HPTuners. I think that he used a HPP3 for so long it has clouded his brain.

 

wkpspd has a performance website, it's www.wickedspeed.com. I didn't see anything about SPE on there but I'm pretty sure he sells SPE stuff.
Jim

 

There are some through and thru morons on that site. That's why I stopped posting over there.

 

I guess that Flyer over there is someone different then.

 

My HPP3 did a good job in its day with just a few bolt ons.

Hand helds just arent for the real enthuesiests (sp). Once your serious about performance you need a custom tune or edit to get real gains. Especialy with a cam, boost, or N2O.

 

Exactly my thoughts... That wkpspd guy is funny though.

 

Site is messed up. I can only get to the front page then nothing. Can't even register.

Does this program let you go in and change Power Enrichment and Volumetric Effciency tables and other complex stuff???