Little dissappointed after the cam swap and tune. only picked up .2 tenths. kinda sucks. heres my time slip
R/T.... .012
60'..... 2.306
330'.... 6.324
MPH.... 57.86
1/8th.... 9.513
MPH..... 76.58
60' times seem to be way slow.

 

60 times could have something to do with those 20's

 

60' times are slow for rcsb. Add a yank to your list of mods and get 2.0 or better.

 

Thats not bad considering 2 tenths in the 8th I think is like 4 or 5 tenths in the quarter

 

my truck is dead out the hole. it feels like a 4cyl. s10 till 60'. only good thing out of the night is a modded lighting only beat me by half a truck. didnt hurt i treed the heck out of him either

 

I added a yank 3000 and m/t drag radials = 2.4 to a 2.0 60 ft. time

 

i think i just need some more bottom end power with the tune. its running the mph to run low nines so now i got to figure out what needs to be changed on the tune to help out.

 

What are the specs of that cam?

 

http://www.compcams.com/Technical/Se...mber=54-412-11

 

I run very similar times just a little better due to the 60' Ive gotten good at running consistant 2.0x 60' and the 1/8 at 9.0x 77.xx mph let the rear tires down to around 20-25 psi go around the water and do a little burnout its helped me.