GMT 800 & Older GM General Discussion 2006 & Older Trucks | General Discussion

not tryin to get a flame goin, just postin new mods

Thread Tools
 
Search this Thread
 
Old Apr 29, 2004 | 12:05 AM
  #1  
back in black's Avatar
Thread Starter
Launching!
iTrader: (6)
 
Joined: Nov 2003
Posts: 223
Likes: 0
From: telephone tx
Default not tryin to get a flame goin, just postin new mods

i just finished my nitrous install yesterday, and i got my bottle filled today.

all i can say is :o 8) :wink: :worship: :beerchug: :thumbsup: :o 8) :beerchug: :thumbsup:

spray from dead stop =

spray from 25 punch :worship: :worship:

when i spray at 30 punch on dry sticky pavement it breaks loose for a sec, hooks then pulls, shifts to second, breaks loose for a bit hooks and pulls like a peterbuilt.

20-70 takes about 3-3.5 seconds. didnt go past that cause i had my dad with me. i was already speeding in a 55 (waaaay out in the country)

my a/f ratio guage showed it was still rich at WOT with nitrous.

I will have pics as soon as i get either imagestation or yahoo to let me upload them.

ask ?'s, any and all will be answered if at all possible



all of the lines are covered with wire loom, and nothing is visible but the nozzle. that will be fixed in time :wink:



here is my new grills that i made


http://www.imagestation.com/picture/...7.jpg.orig.jpg

here is a closer one

http://www.imagestation.com/picture/...2.jpg.orig.jpg

the box under my bedcover.

http://www.imagestation.com/picture/...1.jpg.orig.jpg

heres the bottle inside the box

http://www.imagestation.com/picture/...2.jpg.orig.jpg


these next ones will show the full throttle switch

http://www.imagestation.com/picture/...a.jpg.orig.jpg

http://www.imagestation.com/picture/...a.jpg.orig.jpg

here is where my nitrous and fuel solenoids are hidden, notice my cool green intake


http://www.imagestation.com/picture/...3.jpg.orig.jpg

heres the nozzle

http://www.imagestation.com/picture/...9.jpg.orig.jpg

heres the full intake

http://www.imagestation.com/picture/...2.jpg.orig.jpg
Reply
Old Apr 29, 2004 | 12:22 AM
  #2  
FILE's Avatar
TECH Senior Member
iTrader: (5)
 
Joined: Apr 2002
Posts: 7,276
Likes: 1
From: Truck Heaven
Default

Awesome, after stall converter this might be my next mod. What are your other mods?
Reply
Old Apr 29, 2004 | 01:08 AM
  #3  
back in black's Avatar
Thread Starter
Launching!
iTrader: (6)
 
Joined: Nov 2003
Posts: 223
Likes: 0
From: telephone tx
Default

4.56 motive gears, removed cat, Full-Bore muffler, dropin k&n, traction bars, a/f ratio guage.

3/5 drop, and some more visual mods.

it ran a 8.87 @ 76mph in the 1/8th before nitrous. i hit second at 68mph so it dont pull much at the last of the 1/8th. but withthe nitrous, it is rediculous.

i see maybe 7 second passes and 12's in the 1/4 if i play my cards right.

1st is nonexistant on the street if you spray, i did it once just for fun

from a dead stop it goes through first faster then if you revve it in neutral.....no sh it


i will hopefully be goin to the 1/8th mile track saturday, i will be launchin without nitrous and hittin it at around 20mph. it should stick at the track. should make for a fun night. so if anyone is around the greenville dallas area i will be at redline raceway in caddo mills this saturday.

come and watch the fun.
Reply
Old Apr 29, 2004 | 09:03 AM
  #4  
TECH Fanatic
 
Joined: Dec 2003
Posts: 1,721
Likes: 0
From: oklahoma
Default

man you need some slicks to really get the beast under contol, then you could shoot it right out of the hole.
Reply
Old Apr 29, 2004 | 10:31 AM
  #5  
GREGGO's Avatar
TECH Senior Member
iTrader: (2)
 
Joined: Dec 2001
Posts: 9,101
Likes: 0
From: League City, Texas
Default

Pics were just to big! Linked them instead. Looks like your having fun now.
Reply
Old Apr 29, 2004 | 11:00 AM
  #6  
MacADaYear's Avatar
TECH Addict
 
Joined: Apr 2002
Posts: 2,527
Likes: 0
From: Cali
Default

Maybe you should mention you have a DODGE when posting on the LS1TECH site....
Reply
Old Apr 29, 2004 | 11:31 AM
  #7  
Launching!
 
Joined: Apr 2003
Posts: 242
Likes: 0
From: college station, tx
Default

Originally Posted by -= MacADaYear =-
Maybe you should mention you have a DODGE when posting on the LS1TECH site....
haha yeah i was wondering why in the title it said "not tryin to get a flame goin" then i figured it out, and for a split second i was filled with indescribeable rage, then i came back to my senses, so cheers man cool truck
Reply
Old Apr 29, 2004 | 11:46 AM
  #8  
BigTex's Avatar
? ? ? ? ? ?
iTrader: (16)
 
Joined: Nov 2001
Posts: 7,126
Likes: 2
From: East of Dallas
Default

Originally Posted by back in black
so if anyone is around the greenville dallas area i will be at redline raceway in caddo mills this saturday.

come and watch the fun.
What time are you going to be there?
Reply
Old Apr 29, 2004 | 11:47 AM
  #9  
MacADaYear's Avatar
TECH Addict
 
Joined: Apr 2002
Posts: 2,527
Likes: 0
From: Cali
Talking

Hey guys! Lets all run to the dodge forums and post our mods...

WOOOOOOOOOO HOOOOOOOOOOOOOOO



(not flaming but common..... )
Reply
Old Apr 29, 2004 | 11:49 AM
  #10  
redaddiction's Avatar
TECH Junkie
iTrader: (12)
 
Joined: Jul 2002
Posts: 3,421
Likes: 0
From: Austin, TX
Default

Give me an address and a time for saturday and i"ll come play
Reply



All times are GMT -5. The time now is 08:23 AM.