NNBS police brake upgrade for NBS
#21
Guys, sorry I didn't update this but I had been fighting with a brake light issue.
The calipers have PBR embossed on the side indicating Baer as the company.
I'm still running the factory rubber hoses because based my reading I wasn't sure how much the SS lines would help. Some people claim a big difference others say its minimal. I wasn't convinced it would be worth $140.
Also, I still need to rebleed the brakes and I'm betting there's air in the ABS module. I've been waiting for it to rain here so I can go out and engage ABS and then do a conventional bleed.
The calipers have PBR embossed on the side indicating Baer as the company.
I'm still running the factory rubber hoses because based my reading I wasn't sure how much the SS lines would help. Some people claim a big difference others say its minimal. I wasn't convinced it would be worth $140.
Also, I still need to rebleed the brakes and I'm betting there's air in the ABS module. I've been waiting for it to rain here so I can go out and engage ABS and then do a conventional bleed.
#24
I did this swap on my truck and it stops much better but i also used the tech 2 to bleed them. And whoever commented on these trucks not stopping, go drive and OBS and these brakes are leap and bounds better then before.
Thread
Thread Starter
Forum
Replies
Last Post
Steve-O-08
PROJECTS GALLERY
323
04-19-2018 09:32 AM
SLOPONY
GMT 800 & Older GM General Discussion
20
10-18-2016 06:05 AM