next?
#11
sadly i knew this day would come. you pulled every trick out of the book to make the truck go faster. for a guy who made a 4500 plus truck run low tens, a corvette will be too easy to go fast. a colorado on the other hand are begging for a big V8 swap. as far as i know nobody has done one yet.
#12
Originally Posted by bronze123
sadly i knew this day would come.....as far as i know nobody has done one yet.
#14
Have they started producing the Colorado SS yet? I had saw some pictures of em and they look badass. Supposed to have the LS2 6.0 400Hp 400Tq going through a 4L70E Tranny in to a 9.5 inch rear w/3.73's.
#16
I say you are very far from being finished with your current truck. Needs a good rear end, needs a better suspension,need to get it so you can make a pass at full boost, 26psi or more?? Hell, dont stop now, lets see how far you can take it
#17
You could deffinately lift the tires on the colorado if you had some meats on the back. Im not a big fan of mini trucks but it would be cool to see you pull the front end. I bet those things weigh like 3000 at the most. Im forit. Bring your truck back to stock and put everything you have on there now on a colorado. Could be cool. I guess this means no AWD take offs...or does it?
#19
Originally Posted by 02sierraz71_5.3
hhhmmmm where do you go after youve got a 4x4 truck that runs 9's.
I say screw it make a business of it dream big think sponsors think prostock.
I say screw it make a business of it dream big think sponsors think prostock.
#20
i like the idea, this was my favorite truck of all time based on the same idea.
this truck was a 4x4 sonoma that was lowered with some Z06 wheels put on. other than that it looks stock from the outside. underhood is a 427 Gen III SB with twin's on it. all done by LPE.
More Pics
this truck was a 4x4 sonoma that was lowered with some Z06 wheels put on. other than that it looks stock from the outside. underhood is a 427 Gen III SB with twin's on it. all done by LPE.
More Pics
Last edited by zippy; Sep 26, 2005 at 02:54 PM.




